We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

   PastimesAll Things Technology - Media and Know HOW

Previous 10 Next 10 
From: Don Green9/16/2022 7:58:30 AM
   of 1101

Share RecommendKeepReplyMark as Last Read

From: Don Green9/16/2022 5:51:17 PM
1 Recommendation   of 1101
6 Best Ways To Run Windows On Mac In 2022 (inc. M1 & M2 Macs)

September 13, 2022

Nowadays it has never been easier to run Windows on a Mac so we’ve looked at the best ways to do so in 2022 including on M1 & M2 Macs.

Installing Windows 10 or Windows 11 on your Mac is useful for many reasons from running Windows only software to playing PC only games.

It’s also much cheaper and more convenient than buying a separate PC or laptop just to use Windows on.

However, there’s no doubt that some ways of installing Windows on a Mac are much easier, reliable and effective than others.

We’ve taken a closer look at the different options available so you can decide which one is best for you.

Share RecommendKeepReplyMark as Last Read

From: Don Green9/17/2022 11:24:04 AM
1 Recommendation   of 1101
The 7 best magnetic charging cables

Lauren Moison

Whether you’re looking to limit wear and tear to your charging ports or just want an easy way to snap charging cords into place, the best magnetic charging cables come with a variety of connectors. As you shop, consider the cord length that’ll best suit your needs. You’ll also come across handy features like rotating hinges for optimal charging angles.

FACROO 540 degree magnetic charging cable

Share RecommendKeepReplyMark as Last Read

From: Don Green9/18/2022 3:50:05 PM
   of 1101

Share RecommendKeepReplyMark as Last Read

From: Don Green9/20/2022 9:08:23 AM
   of 1101
YouTube’s ‘Dislike’ Button Doesn’t Do What You Think

YouTube creators often implore their viewers to ‘smash that Like button,’ believing its feedback to be vital to their future success on the algorithm-driven platform. But a new study from the Mozilla Foundation suggests that users who hit the Dislike button on videos to weed out content they don’t want to see are wasting their time.

The study used inputs from 22,722 users who had installed Mozilla’s RegretsReporter browser extension, who were tracked between December 2021 and June 2022. Researchers analyzed more than half a billion YouTube recommendations that were made after users clicked on one of YouTube’s negative feedback tools, such as the Dislike or Don’t Recommend Channel buttons. “These are the tools YouTube offers for people to control their recommendations, but how does that actually impact your recommended videos?” asks Becca Ricks, senior researcher at Mozilla, pointing to YouTube’s own support site on how to “manage your recommendations and search results.”

Different button inputs had different effects on the likelihood of being recommended similar content going forward. Pressing Don’t Recommend Channel would stop only 43 percent of unwanted video recommendations, according to Mozilla, while the Dislike button stopped only 12 percent of recommendations users did not like. “What we found was that YouTube’s control mechanisms do not really seem to be adequate for preventing unwanted recommendations,” says Ricks.

Mozilla’s investigation was prompted by YouTube’s increased public comments in recent years about its recommendation system. “They’ve been talking a lot about metrics like time well spent or user satisfaction as opposed to watch time,” says Ricks. “We were really curious to what degree some of those signals were being picked up by the algorithm, especially because in the previous YouTube report we worked on, we had heard from people that they didn’t feel like they were in control, or they didn’t really feel like taking actions on unwanted videos really translated well to the recommender system.”

For instance, one user in the Mozilla study responded negatively to this Tucker Carlson clip posted by Fox News on February 13. One month later, he was recommended another clip of Carlson’s TV show, again posted by Fox News’s official YouTube channel. A different user expressed a negative response to a video showing webcams focused on Ukraine’s conflict zones in late February; within a month, they were shown another video, this time from the WarShock YouTube channel, detailing how dead Russian soldiers are removed from Ukraine. Ricks has no qualms with the content of the videos, saying it doesn’t breach YouTube’s guidelines. “But if you as a user say you don't want to see it, it’s kind of shocking that it continues to be recommended,” she says.

“I’m not really surprised,” says Guillaume Chaslot, a former YouTube employee and founder of AlgoTransparency, a site that highlights the YouTube algorithm. “I feel, big picture, you should be able to choose and specify to the algorithm what you want, and YouTube absolutely doesn’t let you do that,” he adds.

Share RecommendKeepReplyMark as Last Read

From: Don Green9/21/2022 9:45:52 AM
   of 1101
Does It Matter Which Graphics Card Manufacturer You Choose?

Arthito/Shutterstock.comWhen you shop for a graphics card, you’ll usually settle on a specific model you want, then look for the best price—but you’ll find that multiple manufacturers make the same model. Do the differences between them matter?

Update, 8/25/22: Verified content for accuracy. Ensured links still work. Updated images.Why Are There Different Manufacturers, Anyway?It’s an odd situation—almost like if you went shopping for an F-150 pickup truck, and the salesperson asked if you wanted the Ford, Chevy, or Dodge version. For example, a quick search for an NVIDIA GeForce GTX 1070 card on Newegg reveals models made by EVGA, MSI, Zotac, ASUS, and Gigabyte—all on the first page! AMD Radeon graphics cards have a similar variety of suppliers. But within the same specific card design, almost all of them have the same capabilities. What gives?

The reason is the somewhat unique business-to-business relationships in the GPU market. NVIDIA and AMD sell their chips directly to electronics manufacturers for inclusion in all sorts of stuff, from laptop and desktop computers to game consoles, mobile phones, and even cars. They also sell to third-party graphics card manufacturers like EVGA or Sapphire.

These third-party companies take the GPU chips and boards, package them with the necessary extra parts like video ports, coolers, and plastic cases, and then sell them to consumers at retailers like Amazon and Newegg.

There doesn’t necessarily need to be a middleman seller. NVIDIA manufactures Founder’s Edition cards itself and sells direct. But the GPU designer/manufacturer/retailer relationship has been going strong since the 1990s, and it looks like it will be the status quo for the foreseeable future.

What’s The Difference Between Manufacturers’ Cards?All the different card manufacturers get the GPUs from the same place: NVIDIA and AMD. But when selling to consumers, you need to differentiate your product based on price or features. There isn’t a lot of wiggle room in the retail prices. Suppose one company goes significantly lower than the others. In that case, everyone tends to follow suit, and with costs like manufacturing and distribution essentially set, there’s only so much they can do to remain profitable.

So consumer-focused brands will differentiate in other areas. Some might offer blower coolers or open-air coolers. Some will make their cards shorter to fit in more compact cases. Some will try to make their cards stand out with flashy-looking fans and lights. A common technique is making minor changes to the card’s design, like a small “factory” (pre-installed) overclock on the card’s GPU or V-RAM. These variations get a lot of ink on the boxes that the GPUs come in, with marketing phrases like “Overclocked Edition,” “FTW,” or “AMP.”

NvidiaBut except for a few significant tweaks, like a pre-installed water cooling setup or the installation of extra memory modules, these changes usually don’t result in more than a percent or two of performance versus the baseline. If two cards from the same NVIDIA or AMD product line are of the same model, and they can fit inside your computer’s case and plug into your motherboard, there’s not going to be a massive difference in how they make your games look. Company-supplied overclocking, in particular, isn’t anything you need to worry about: you’ll get more dramatic results by doing it yourself.

Which Changes Really Matter?So, which of these changes actually do matter? Well, the card’s length is important, especially if you’re looking for something high-end. If your case is too small to hold the card, it doesn’t matter how fast it is. Designs with more elaborate double- or triple-fan coolers will be longer, while those made specifically for compact Mini-ITX builds will be shorter.

GPU clearance lengths are generally included in the specifications page for your PC’s case—if you can’t find it, you can always open up the case yourself and measure the space from the back to the front near the PCI-E slot on the motherboard. The specifications page of the card itself will also list its length, but be sure to take into account where the power input is. If your card fits, on paper, within a fraction of an inch but the power cables sticking out the back adds more than that fraction of an inch, then, in reality, your card won’t fit.

ZotacThe difference between a blower and an open-air cooler design is minor, but it’s crucial if you have a case with low airflow. Check out this guide to see the different design approaches between the two cooling types. Of course, if you prefer a quieter machine, you can get a more expensive card with a pre-installed water cooler. If you’re going to install your own water cooling system with aftermarket hardware, you’ll need a pricey custom cooling block, which replaces the stock air cooler and comes from boutique suppliers.

EVGAAnother change that can significantly alter performance is extra RAM. Some cards can accommodate additional GDDR RAM modules, and secondary manufacturers will install them directly onto the PCB. With more video RAM, a card can hold much more information in local memory, like high-resolution textures and game engine files. That can result in a considerable boost to performance and load times. Extra RAM isn’t possible on every card. Still, if a manufacturer includes it, they’ll usually highlight it in the card’s advertising and packaging and ask for a small premium over the going rate for that model. Since video memory is something you can’t upgrade yourself, it’s a significant point of differentiation.

The Real Difference: Price, Trust, And WarrantyIf there’s only a small overclock or a slightly altered cooler separating the two cards you’re looking at, then the most significant differentiation is the price. Obviously, the cheaper, the better—especially if you’re dropping $300 or more to play the latest games.

But it might be worth paying a little more for a new graphics card to get a little extra peace of mind. A card from a more reliable manufacturer is desirable. And because “reliable” is a nebulous concept when dealing with complex electronics that are so interconnected, a good warranty and a reputation for honoring it are even better.

EVGAMost manufacturers offer a two-year or three-year warranty with their cards, and some offer an extension if you register your card with a customer account. (You’ll want to keep your proof of purchase either way.) Some, like EVGA, XFX, and Zotac, even have “lifetime” warranties with registration. And sometimes, the warranty can be transferred to a new owner if you sell the card, or the warranty will be honored even if you overclock it yourself.

You can usually find the warranty terms for the card directly on the sale page. If that doesn’t work, Google the manufacturer’s name and “warranty” to quickly find the company’s official information.

So, when shopping for a new graphics card and choosing between two very similar models, go through the following checklist to see the significant points of differentiation. It should help you make a more confident decision.

Will both cards fit in my PC case?Is one card significantly cheaper than the other?Does one card have more RAM than the other?Do these cards have different cooler designs, and do that matter for my case?Does one manufacturer offer significantly better warranty terms?

  • Share RecommendKeepReplyMark as Last Read

    From: Don Green9/21/2022 1:42:48 PM
       of 1101

    Share RecommendKeepReplyMark as Last Read

    From: Don Green9/26/2022 1:13:16 PM
    1 Recommendation   of 1101
    The Unicycle has come a long way baby!

    Share RecommendKeepReplyMark as Last Read

    From: Don Green9/26/2022 8:19:02 PM
       of 1101
    Off Topic But memories galore….

    Abbey Road track-by-track - Beatles engineer Geoff Emerick: "For the first time, John and Paul knew that George had risen to their level"

    published about 16 hours ago

    (Image credit: Apple)
    Abbey Road was released today, 26 September, in 1969. In 2014, we were lucky enough to speak to engineer Geoff Emerick about the making of this bonafide classic.

    It's one of the most iconic album covers of all time: John Lennon, Paul McCartney, George Harrison and Ringo Starr strolling across a zebra-striped street called Abbey Road in St John's Wood, north London.

    It is an image as memorable as the moon landing - and one copied by tourists on a daily basis. (Even a few bands have paid homage, most notably Booker T & The MGs.)

    Ironically, the shot was a last-minute decision.

    Share RecommendKeepReplyMark as Last Read

    To: Don Green who wrote (949)9/28/2022 6:24:17 PM
    From: Don Green
       of 1101
    Apple's iPhone overshoot

    Data: FactSet; Chart: Axios Visuals
    Apple shares were sent tumbling today on a Bloomberg report that suggested demand for new iPhone 14 products was weaker than the company previously expected, Hope writes.

    Yes, but: Apple analysts were largely unsurprised and unfazed.

      Gene Munster at Loup Funds noted on Twitter that production cuts happen "every iPhone cycle" because "Apple always overshoots production goals to its suppliers in the summer and 'cuts' in the fall."
    The big picture: Sales growth of the iPhone (which alone makes up more than 50% of the company's overall sales) have cooled over the past few years — and it's partly why the company has pushed so deeply into higher margin services, including news, gaming, music and media.

    Of note: Apple shares closed down 1.3% today, after falling nearly 4% earlier in the day

    Share RecommendKeepReplyMark as Last Read
    Previous 10 Next 10