| From: Eric | 4/8/2024 3:48:06 PM | | | | | | 
Calpine grid-scale battery, image courtesy of Calpine
Swapping An 800 MW Gas Generator For A 680 MW/2720 GWh Grid-Scale Battery
What happened to make that combined cycle facility obsolete? Solar energy. California has lots of it, and most of it is generated in the afternoon. If you can store it for a few hours and then send it back to the grid as the sun begins to set, the grid is distributing zero emissions electricity, which, if you are at all interested in addressing carbon dioxide pollution, is a very good thing.
cleantechnica.com |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| From: Eric | 4/8/2024 4:21:36 PM | | | | | | 
Globeleq To Build Largest Standalone Battery Energy Storage System In South Africa
2 days ago
Press Release 6 Comments
Sign up for daily news updates from CleanTechnica on email. Or follow us on Google News!
UK company Globeleq, the leading independent power company in Africa, yesterday announced that its Red Sands project in the Northern Cape has been awarded Preferred Bidder status in South Africa’s Energy Storage Capacity Independent Power Producer Procurement Programme (ESIPPPP). Globeleq is majority-owned by British International Investment (BII), the Development Finance Institution of the UK Government.
Battery storage is an essential enabler of renewable-energy generation, and the market for these systems is growing rapidly in South Africa and worldwide as a means of resolving energy crises and tackling climate change. These systems provide reliable power supply on demand, even when the energy grid is unstable, overcoming the challenges of intermittent wind and solar sources. They store energy at times of excess generation so that it can be released into the grid when generation falls short of demand, helping to mitigate the need for load-shedding.
Experts say that widespread energy storage is vital to expanding the reach of renewables and speeding the transition to a carbon-free power grid — this is key to helping reduce South Africa’s reliance on fossil fuels as it seeks to transition to clean energy. This R5.7 billion (US$300 million) investment therefore represents a flagship project financed by the UK as part of its commitment under the Just Energy Transition Partnership agreed at COP26.
The Red Sands project is in the Northern Cape, about 100km southeast of Upington, and was originally developed by African Green Ventures, a South African renewable project development company owned by Norwegian based energy firm Magnora ASA. The project will cover approximately 5 hectares (12 acres) and will connect to the grid through the Eskom Garona substation. The substation will be upgraded by the Red Sands project to ensure that full network support capabilities of the project’s batteries can be utilised.
Working closely with leading global battery and balance-of-plant suppliers, Globeleq estimates that the project will require an investment of approximately US$300 million and will take 24 months to construct after financial close, which is expected in 2024.
Globeleq is the largest independent power produce in Africa, providing nearly 1,800 MW of energy in South Africa, Mozambique, Kenya, Tanzania, Cote d’Ivoire, Egypt and Cameroon. Globeleq is a UK company based in London and backed entirely with Official Development Assistance (UK aid).
Red Sands will be Globeleq’s first Battery Energy Storage Solutions (BESS) project in South Africa but the Group owns and operates a combined solar and BESS plant at Cuamba in Mozambique, and is developing BESS projects across the African continent. Globeleq also owns and operates 8 renewable plants (6 solar PV, 2 wind) in South Africa with a total generating capacity of 384 MW.
Mike Scholey, Globeleq’s CEO commented: “I am delighted that we have received Preferred Bidder status for this very important project, and I look forward to working with the government and our partners to take Red Sands to financial close and into operations. Electricity storage is going to be key not only in helping South Africa meet its considerable industrial and domestic demand for energy but also across Africa as more renewable energy projects benefit from the advances our industry has made with BESS technology.”
British High Commissioner to South Africa, Antony Phillipson said: “This is a significant investment in South Africa’s future. The UK is proud to play such a vital role in helping to tackle the energy crisis with new technology that will bring power supply stability and most importantly support South Africa’s ambition to reduce carbon emissions.”
cleantechnica.com |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| From: Eric | 4/10/2024 10:09:23 PM | | | | | | How safe are lithium iron phosphate batteries?
Researchers in the United Kingdom have analyzed lithium-ion battery thermal runaway off-gas and have found that nickel manganese cobalt (NMC) batteries generate larger specific off-gas volumes, while lithium iron phosphate (LFP) batteries are a greater flammability hazard and show greater toxicity, depending on relative state of charge (SOC).
April 10, 2024 Marija Maisch
Thermal runaway from initiation to propagation and resulting hazards
Image: Creative Commons CC BY 4.0
Share
    
It is often said that LFP batteries are safer than NMC storage systems, but recent research suggests that this is an overly simplified view.
In the rare event of catastrophic failure, the off-gas from lithium-ion battery thermal runaway is known to be flammable and toxic, making it a serious safety concern. But while off-gas generation has been widely investigated, until now there has been no comprehensive review on the topic.
In a new paper, researchers from the University of Sheffield, Imperial College London, and the University of St Andrews in the United Kingdom have conducted a detailed meta-analysis of 60 papers to investigate the most influential battery parameters and the probable off-gas characteristics to determine what kind of battery would be least hazardous.
They have found that while NMC batteries release more gas than LFP, but that LFP batteries are significantly more toxic than NMC ones in absolute terms.
Toxicity varies with state of charge (SOC). Generally, a higher SOC leads to greater specific gas volume generation.
When comparing the previous findings for both chemistries, the researchers found that LFP is more toxic at lower SOC, while NMC is more toxic at higher SOC. Namely, while at higher SOC LFP is typically shown to produce less off-gas than other chemistries, at lower SOC volumes can be comparable between chemistries, but in some cases LFP can generate more.
Prismatic cells also tend to generate larger specific off-gas volumes than other cell forms.
The composition of off-gas on average is very similar between NMC and LFP cells, but LFP batteries have greater hydrogen content, while NMC batteries have greater carbon monoxide content.
To assess the fire hazard of each chemistry, the researchers calculated and compared the lower flammability limit (LFL) of the off-gasses. They have found that LFL for LFP and NMC are 6.2% and 7.9% (in an inert atmosphere) respectively. Given the LFL and the median off-gas volumes produced, LFP cells breach the LFL in a volume 18% smaller than NMC batteries.
“Hence LFP presents a greater flammability hazard even though they show less occurrence of flames in cell thermal runaway tests,” the researchers said.
They discussed their findings in “ Review of gas emissions from lithium-ion battery thermal runaway failure – Considering toxic and flammable compounds,” which was recently published in the Journal of Energy Storage.
pv-magazine.com |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| From: Eric | 4/11/2024 9:28:44 PM | | | | | | Quinbrook closes first stage of 2 GWh Supernode battery project
Australian-owned renewable energy investor and developer Quinbrook Infrastructure has announced financial close and the start of construction on a 250 MW / 500 MWh battery energy storage system that will form the first stage of a $2.5 billion renewables-powered data storage precinct in Queensland.
April 12, 2024 David Carroll
Image: Quinbrook Infrastructure
Share
    
Quinbrook Infrastructure has begun building the $325 million (USD 212 million) first stage of its approved Supernode project that will eventually host an up to 800 MW / 2,000 MWh battery energy storage system designed to support the data centre and provide dispatchable services to the grid in southeast Queensland.
Queensland-based Quinbrook said it had secured the financing for the Supernode’s first stage battery project after locking in an offtake agreement with Origin Energy. Australia’s second largest electricity retailer has committed to buy the full capacity of the initial 250 MW, two-hour battery energy storage system under a long-term offtake contract.
The Supernode battery will utilise cells from an international manufacturer paired with inverters supplied and integrated by United States-headquartered GE Vernova. The 250 MWh first stage is due to be delivered in the second half of 2025 with further expansions to follow.
David Scaysbrook, co-founder and Managing Partner of Quinbrook, said when operational the Supernode battery will enable the efficient storage of surplus solar and wind energy, aid the displacement of coal and other emissions-intensive generation sources, and provide support for the grid.
“The successful close of Supernode stage one is significant for Queensland as it delivers valuable large-scale storage at the best possible location in the state’s power grid,” he said.
The Supernode project is being developed on a 30-hectare site in the northern Brisbane suburb of Brendale. The site is adjacent to the South Pine substation, the central node of Queensland’s electricity grid where more than 80% of all power capacity located in the state transmits to. The site has three separate high-voltage connections.
“The South Pine site is a unique and strategic location offering unparalleled power supply access and redundancy,” Scaysbrook said, adding that the Supernode battery “will directly address stability issues facing the grid as a result of record levels of rooftop solar installation across Queensland.”
Quinbrook Australia regional leader Brian Restall said the project has been fully developed by the Quinbrook team, all the way from concept, land acquisition, permitting, procurement and offtake.
“It is a case study in how we create value for our offtakers and investors alike,” he said.
The agreement with Origin is one of the largest binding battery offtakes on a MW basis signed to date in Australia between two non-government parties.
Origin energy supply and operations Executive General Manager Greg Jarvis said the contract is part of the gentailer’s broader strategy to grow its renewables and storage portfolio, noting that “storage will play an increasingly important role in the provision of reliable energy supply.”
“This is the first time Origin has contracted the offtake of a battery, expanding our storage portfolio to 1 GW once Supernode and our large-scale batteries at Eraring and Mortlake power stations come online,” he said.
pv-magazine-australia.com |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| From: Eric | 4/13/2024 7:21:29 AM | | | | | | CATL unveils first mass-producible battery storage with zero degradation
China-based Contemporary Amperex Technology Co. (CATL) has launched its new TENER energy storage product, which it describes as the world’s first mass-producible 6.25 MWh storage system, with zero degradation in the first five years of use.
April 12, 2024 Marija Maisch
The 6.25 MWh TENER energy storage system is packed in a standard TEU container.
Image: CATL
Share
Battery industry heavyweight CATL has unveiled its latest innovation in energy storage system design with enhanced energy density and efficiency, as well as zero degradation for both power and capacity.
Its new TENER product achieves 6.25 MW capacity in a 20-foot equivalent unit (TEU) container, increasing the energy density per unit area by 30% and reducing the overall station footprint by 20% compared to its previous 5 MWh containerized energy storage system. For example, a 200 MWh TENER power station would cover an area of 4,465 square meters.
According to CATL, TENER cells achieve an energy density of 430 Wh/L, which it says is “an impressive milestone for lithium iron phosphate (LFP) batteries used in energy storage.”
CATL describes TENER as the world's first mass-producible energy storage system with zero degradation in the first five years of use. Leveraging biomimetic solid electrolyte interphase (SEI) and self-assembled electrolyte technologies, it says that TENER enables unobstructed movement of lithium ions and achieves zero degradation for both power and capacity.
This represents a significant advancement in increasing the lifespan of batteries and creates the much coveted “ageless” energy storage system, at least in the first years of the system’s operation.
On the safety front, CATL has also introduced a few improvements.
“Powered by cutting-edge technologies and extreme manufacturing capabilities, CATL has resolved the challenges caused by highly active lithium metals in zero-degradation batteries, which effectively helps prevent thermal runaway caused by oxidation reaction,” it said.
It has also established a dedicated, end-to-end quality management system that includes technology development, proof testing, operation monitoring, and safety failure analysis. It sets different safety goals as required by different scenarios, and then develops the corresponding safety technology to meet those goals. In addition, it has built a validation platform to simulate the safety test of energy storage systems in different power grid scenarios.
After a project is put into operation, CATL continues to monitor its operational status through AI-powered risk monitoring and an intelligent early warning system. It calculates the failure rate of energy storage products throughout their life cycle, and thus verifies the safety design goals while continuing to optimize them.
The manufacturer says it has reduced the failure rate to the PPB (single defect rate per billion) level for cells used in TENER, which, when extended to the operation throughout its full lifecycle, can lower operating costs and significantly enhance the internal rate of return. CATL also says that TENER is equipped with long service life, without specifying the warranty specs.
The Chinese battery maker has ranked first in market share of global energy storage battery shipments for three straight years, with a global market share of 40% in 2023. In its latest annual report, it said that its sales of energy storage battery systems hit 69 GWh in in 2023, representing a year-on-year increase of 46.81%.
pv-magazine.com |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| From: Eric | 4/17/2024 12:30:20 PM | | | | | | Big batteries will undercut gas, but it’s hydro that might lose market share first
Image: EnergyAustralia. The Riverina and Darlington Point BESS.
David Leitch
Apr 17, 2024
9
Share via Email
Battery
Commentary
Storage
Utility battery power is going to grow from about 1.3 GW in the NEM to closer to 7 GW over the next 3 years. That is clearly going to have an impact on wholesale prices. That 7 GW represents about 25 per cent of the 26 GW of average peak evening demand between (QLD time) 6pm to 8pm.
Peak wholesale electricity prices are currently set by hydro and gas, more often hydro, but when gas does set the price it may be higher than the hydro price (see Figure 7).
Once the batteries are built they will have capacity roughly equal to what gas and hydro together dispatch on average at dinnertime. See Figure 5. Of course there is generally lots of spare gas and hydro capacity beyond what is dispatched.
The fundamental view is that batteries, gas and hydro will compete for market share. Unlike hydro, which is a tight oligopoly and even gas where much of the capacity is held by Origin, Snowy Hydro, AGL and EnergyAustralia, batteries will initially be owned and operated by a wide variety of players.
Like every other market the big guys will try to consolidate market share, but barriers to entry are low, provided you can navigate the connection rules.
Gas requires that capacity be reserved on the transmission line for every half hour of the year, just in case. That’s why the gas is owned by the gas retailers, they rent the pipes anyway.
And Snowy and Southern Hydro typically have strictly limited storage and so they ration supply. Batteries have few restrictions, only the limited number of cyles over their lifetime. But batteries are also incentivised to get a return before a cheaper capital cost battery turns up. So they will want their revenue from day 1.
What will another 20% of peak supply do to peak wholesale prices? I expect more total supply will also lower price. Wind supply tends to impact every half hour of the day, against which must be set the closure of Eraring in the near terms.
Figure 1: daily average prices at dinner time. Source:NEM Review
I’d argue that prices at 18:00 could fall even $100/MWh over the next couple of years as the batteries come on line.
Overall I think that average fuly year flat load prices could fall by $10-$15/MWh as a result of the new battery supply. The fall in peak prices might be partly offset by a rise in midday prices. Whether it is will largely depend on when Eraring is closed.
Figure 2: fuel weighted prices. Source: NEM Review
Traditionally, with the exception of hydro the SRMC (short run marginal cost) has been driven by the fuel cost. Brown coal fuel cost is lower than black coal and so is dispatched first.
Gas has a much higher fuel cost but a lower capital cost and so gas plants sit in reserve and only operate for a couple of hours a day. Hydro has pretty much zero SRMC, but outside Tasmania there is a limited quantity which is generally held back for the highest price periods.
Then along comes variable renewable energy (VRE), except that really the solar is not all that variable. The impact of solar is obvious, it kills price in the middle of the day. The more so because coal has to keep running.
The impact of wind is best seen in South Australia:
Looking at the average day, price spikes around 6:30 – 7:30 pm.
Figure 3: SA average day. Source: NEM Review So how much impact does the wind share have on that peak price?
Figure 4: wind share v price at dinnertime in Sth Aust. Source: NEM Review
Figure 4 was derived by taking taking the wind share in the 6:30 – 8:00 PM window for every day in the past 3 years then making 100 bins of the wind share sorted from highest to lowest and looking at the median price for each bin.
It provides a clearer picture, to my way of thinking, than a standard correlation graph. Just as you might expect the less the wind blows at dinner time the higher the price tends to be. Other factors can also set the price of course so that even when the wind share is 100% price need not be zero or negative.
More wind means lower prices Unfortunately, other than in South Australia wind share of demand is relatively low, only about 13% across the NEM over the past year, with a low of 4% in QLD and a high of 47% in South Australia. QLD is changing that but NSW with a share of 9% is very slow.
So we cant rely on more wind lowering prices materially in the next few years. Therefore we turn to batteries.
Across the NEM supply between 6:00 PM and 8:00 PM is:
Figure 5: NEM dinnertime demand. Source:NEM Review
Note that demand is also dropping as the last of the solar drops off. Over those half hours demand falls by 1 GW.
Into this mix we are adding at least 5 and actually it will be closer to 6 GW of batteries, all of which will be incentivised by peak prices.
Figure 6: Batteries under construction. Source: Renewmap
Significant battery capacity is reserved for purposes other than trading. Even that reserved capacity may have an impact on price but I don’t consider that further here. Say trading capacity of 4.5 GW of what I expect in 3 years time will be not 5.4 but 6 GW of new batteries is available for discharge in peak demand.
Because the batteries will charge from solar in the middle of the day, even in winter, they will have a lower fuel cost than coal, and gas. In the first instance batteries can compete against hydro and gas. In NSW and Victoria it may well be Snowy Hydro and AGL’s Southern Hydro that feel the pressure.
After all, and particularly in winter, it’s Snowy Hydro and Southern Hydro that cherry pick prices.
Figure 7: price settin fuel, Jun qtr. Source: AEMO
In Figure 7 it’s already clear that batteries have a role to play in setting price, most visibly in QLD, but hydro dominates. Hydro and gas both tend to bid above $150/MWh.
In theory 4.5 GW of batteries could displace 100% of 2.9 GW of gas demand, but I somehow doubt they will as some gas will be required to keep running, such as in South Australia.
The batteries could even eat into say 1 GW of coal supply on top of not requiring any gas. At least that is what the supply and demand numbers suggest could happen.
As shown in Figure 2 batteries have not so far competed with gas, at least not in States which are short on energy, and that means NSW and QLD. Equally though it could be that batteries are undercutting gas in South Australia and Victoria because that is where there are already more MW of battery installation.
Figure 8: Operating batteries. Source: RenewMap
And of course the existing batteries will themselves need to be dispatched.
Operators of batteries have other revenue opportunities in the frequency control market. This may mean they are less incentisied to use up capacity in the trading market. Even so I expect they will.
Battery operators need to pay attention to the fact that battery costs are falling all the time. This means that battery owners are incentivised to get a payback on their battery as quickly as possible before they are undercut by some b**tard with a lower cost piece of kit.
Figure 9: battery growth. Source:RMI
Share on Twitter Share on Facebook Share on Pinterest Share on LinkedIn Share on Reddit
reneweconomy.com.au |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| From: Eric | 4/22/2024 9:36:22 AM | | | | | | The role of energy storage systems in the electrification movement
This Earth Month is the ideal time to highlight the trend toward electrification and offer businesses and homeowners a viable path to get there.
April 22, 2024 Jim Brown
Image: LG ESS
Share
    
Earth Month reminds us that the move from fossil fuels to electrification continues to gain momentum through incentives and regulations, and it’s inspired by companies and homeowners who are committed to reducing their carbon footprint. Another strong motivator for businesses and consumers is the opportunity to introduce energy efficiencies that yield cost savings – such as heat pump-enabled Energy Star certified appliances that are ushering in the clean energy future.
This Earth Month is the ideal time to highlight the trend toward electrification and offer businesses and homeowners a viable path to get there.
Homeowners needs to be educated on the concept of electrification. A recent nationwide survey conducted by a third-party on behalf of LG Electronics USA surveyed 1,579 U.S. homeowners in January 2024. They found that only 16% of American homeowners are currently familiar with home electrification.
Given the number of appliances and whole-house systems in a typical residence – along with renewables including solar panels and EV chargers in a growing number of households – the road to electrification can be overwhelming.
A logical starting point is investing in an energy storage system (ESS). It’s a move that applies to existing users of PV products and can be an attractive stepping-stone for those who may be thinking about or planning to install solar for their home or acquire electric vehicles in the future.
The nationwide survey also reports that among homeowners with residential solar, 25% currently have an ESS while 80% of those who do not yet have one say it is a future priority; 12% say it’s the number one priority.
ESS advantages
Tying a home’s energy footprint together with an energy storage system is an excellent step toward electrification that allows the homeowner to realize a number of tangible collateral benefits beyond reducing emissions from fossil fuel-based energy sources. It enables homeowners to manage their energy and take control of its use.
It’s smart to guide homeowners to understand that the ESS can be used independently from the grid and can charge during the daytime when electricity prices are lower. Stored energy can then be utilized during peak consumption hours when prices increase in many geographic regions.
It’s important for homeowners to know that an ESS can provide backup power which can be essential in the case of power outages. In fact, the nationwide survey revealed that 67% of U.S. homeowners experienced a power outage in the past year and half of them experienced multiple outages, some lasting hours or longer. In certain ESS models an LED display on the front of the system allows owners to check the estimated battery state of charge and encourages mindfulness of electricity use during power outages.
Advances in technology and design have made the ESS a more versatile and attractive alternative to the traditional backup generator. An all-in-one integrated system is incorporated into a complete smart home environment with appliances, electronics and HVAC systems. Management systems that allows the user to delegate how, where, and when the unit’s stored energy is used to maximize efficiency gives homeowners the ability to achieve pure independence from the grid, providing them with better control in managing their home energy needs.
This point is especially relevant to the surveyed homeowners who have expressed frustration over grid instability and concerns over the impact of extreme weather events.
Despite the need to educate the public at large on the benefits of ESS, the nationwide survey found that homeowners seeking to overcome the challenges of grid instability with an ESS are most interested in lowering their energy costs (90%). They also identify other appealing benefits of battery-powered ESS, including uninterrupted power supply (89%), less dependency on the utility (86%), potential to sell the energy back to the utility (84%), environmental benefits/sustainability (82%), and less dependency on fossil fuels (82%).
Incentives abound
In speaking with potential ESS customers, it makes sense to emphasize that investment in home electrification is rewarded by federal and state incentives. Residential ESS installations currently qualify for up to a 30% tax investment credit through the Inflation Reduction Act – a provision that not everyone knows will be in effect until 2033.
In addition, the U.S. Department of Energy has provided $8.8 billion in state funding for Home Electrification Rebates; these are expected to become available this year.
For business owners, a state-of-the-art, long-lifespan commercial ESS solution provides an all-in-one solution equipped with ready-to-deploy technology from storage with ESS, management with the PMS, and complementary systems such as HVAC. Commercial ESS can also qualify for up to a 30% tax credit through 2025.
The impetus can come from you
Interested homeowners are learning about ESS through various means: their own research, published news coverage on trends, products and incentives, and by speaking with neighbors and installers. Our research shows that homeowners want to be smarter about energy usage, fueled not only by a sense of responsibility to the planet but by the grim reality of rising energy costs. Two-thirds of our nationwide survey respondents reported rate hikes over the past year.
Those in the energy industry need to take the responsibility to help homeowners learn how to better manage their energy consumption and set them on a journey toward energy independence. By doing so, we can earn a position as a lifelong energy partner to our clientele. In the survey, two-thirds of those prioritizing ESS cited “a brand I can trust” as a highly important factor in their impending buying decision. Words to the wise during Earth Month 2024.
Jim Brown is senior manager, national sales, LG Electronics ESS. An industry veteran, Jim leads residential ESS business development in the United States for global innovator LG Electronics.
pv-magazine-usa.com |
| | Electron Energy Storage | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| |
