SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

   Technology Stocks3D Printing


Previous 10 Next 10 
From: Savant7/14/2020 12:48:33 PM
   of 794
 
AI device identifies objects at the speed of light: The 3D-printed artificial neural network can be used in medicine, robotics and security, *AND automotive* Science Daily
They say $50
sciencedaily.com

Share RecommendKeepReplyMark as Last Read


From: Savant7/14/2020 5:10:25 PM
   of 794
 
3D printed metal pistons for Porsche.. thedrive.com

Share RecommendKeepReplyMark as Last Read


From: Savant7/17/2020 11:42:48 AM
1 Recommendation   of 794
 
Scientists 3D print gunpowder substitute, achieve 420m/s bullet velocity - 3D Printing Industry

3dprintingindustry.com

Share RecommendKeepReplyMark as Last Read


From: Savant8/31/2020 6:14:23 PM
1 Recommendation   of 794
 
Trine Acquisition Corp.(stock symbol: (TRNE), a SPAC that raised $261 million when it went public in March 2019, has agreed to merge with Desktop Media, a manufacturer of 3D metal printing systems.

TRNE is trading at $11.60 per share this morning, up $1.46.

Desktop Metal to go public via reverse merger

Dan Primack, author of Pro Rata
Axios
August 26, 2020

Desktop Metal, a Burlington, Massachussetts-based maker of 3D metal printing systems, agreed to go public via a reverse merger with Trine Acquisition, a SPAC formed last year by veteran telecom investor Leo Hindery. It would give Desktop Metal an initial market value of around $2.5 billion.

Why it matters: This was the result of a formal, bank-led auction among SPACs, CEO Ric Fulop tells Axios, without Desktop Metal also running a parallel IPO or private equity process. That's unusual, but likely to become more common as SPACs proliferate.

-- Trine will contribute $300 million via the merger, while Desktop Metal also secured $275 million via a $10 per share PIPE from Miller Value Partners, XN, Baron Capital Group, Chamath Palihapitiya, JB Straubel, and HPS Investment Partners.Desktop

-- Metal raised around $450 million in VC funding, most recently in early 2019 at a $1.5 billion valuation. Backers include Lux Capital, Ford, NEA, Kleiner Perkins, Koch Disruptive Technologies, GV, and GE Ventures.

The bottom line: "While the earlier boom in 3D printing focused on consumer printers that could spew out trinkets, today’s focus is industrial uses like automotive and aerospace where designs that could only be produced on such printers create more efficient parts with less weight," per Forbes.

axios.com
=======================
TRNE, which is acquiring Desktop Metal, a manufacturer of 3D printing systems, might merit a close look.

Investor presentation: sec.gov

The transaction includes a $275 million PIPE investment, led by Social Capital's Chamath Palihapitiya. Social Capital was the sponsor of the Virgin Galactic deal. This is very smart money.

Mr. Palihapitiya has written a one page document on what he likes about Desktop Metal.


Share RecommendKeepReplyMark as Last Read


From: Savant9/12/2020 12:36:23 PM
3 Recommendations   of 794
 
Flying jet suit...about 24.4 min into the conference video, talks about 80% of the jet suit is 3D printed, shows some short clips

Testing the new flight suit out of doors, over water

youtu.be





Founder & Chief Test Pilot, Richard Browning flies onto stage at @Cisco Live Europe 2020 in front of 7000 and delivers the closing keynote. Watch as Richard shares the inspiration behind the #JetSuit and walks through the months of failures and setbacks on the innovation journey to reimagining human flight.

youtube.com

Share RecommendKeepReplyMark as Last Read


From: Savant10/9/2020 12:07:58 PM
1 Recommendation   of 794
 
1st 3D printed house with earth
materialdistrict.com




Share RecommendKeepReplyMark as Last ReadRead Replies (1)


From: Savant10/13/2020 11:30:21 AM
   of 794
 
3D Printed Homes: 4 Most Fascinating Projects
all3dp.com

Share RecommendKeepReplyMark as Last Read


From: Following-Mr.Pink10/24/2020 9:54:50 PM
   of 794
 
When investing in the 3d printing space; is it mostly on the manufacturers / printers rather than the software / design piece?

Share RecommendKeepReplyMark as Last Read


From: Savant12/11/2020 10:53:55 AM
   of 794
 
3D printing for nuclear fusion plant considered

U.S. fusion researchers want to build a much smaller, cheaper power plant, leveraging recent advances such as supercomputer simulations of entire tokamaks, 3D printing, and magnet coils made of high-temperature superconductors.


America Finally Makes Plans for Its Own Nuclear Fusion Power Plant (msn.com)

2040 target

Share RecommendKeepReplyMark as Last Read


From: steve7652/3/2021 11:53:28 AM
   of 794
 
I was also looking for one 3D printer and want to know your thoughts on it. Yesterday i check an 3D printer review article(https://theedgecutter.com/best-3d-printer-for-woodworking/) and got to know about Selective Laser Sintering.
I want print metal models and i was looking for one that has good SLS.
So can to guys suggest me one that has good
Stereolithography
Selective Laser Sintering
Price
3D Printer Price
Quality

Share RecommendKeepReplyMark as Last Read
Previous 10 Next 10