Technology Stocks3D Printing

Previous 10 Next 10 
From: EUthenics5/15/2017 2:09:26 PM
2 Recommendations   of 738

I think from their September 2016 presentation they are making good on the move from prototyping
To large scale manufacturing

Share RecommendKeepReplyMark as Last Read

From: Savant5/17/2017 9:17:27 AM
4 Recommendations   of 738
Infertile mice have given birth to healthy pups after having their fertility restored with ovary implants made with a 3D printer. Researchers created the synthetic ovaries by printing porous scaffolds from a gelatin ink and filling them with follicles, the tiny, fluid-holding sacs that contain immature egg cells. In tests on mice that had one ovary surgically removed, scientists found that the implants hooked up to the blood supply within a week and went on to release eggs naturally through the pores built into the gelatin structures. The work marks a step towards making artificial ovaries for young women whose reproductive systems have been damaged by cancer treatments, leaving them infertile or with hormone imbalances that require them to take regular hormone-boosting drugs. Of seven mice that mated after receiving the artificial ovaries, three gave birth to pups that had developed from eggs released by the implants. The mice fed normally on their mother's milk and went on to have healthy litters of their own later in life. Writing in the journal Nature Communications, the scientists describe how they printed layered lattices of gelatin strips to make the ovary implants. The sizes and positions of the holes in the structures were carefully controlled to hold dozens of follicles and allow blood vessels to connect to the implants. Mature eggs were then released from the implants as happens in normal ovulation.

Share RecommendKeepReplyMark as Last Read

From: Savant5/17/2017 10:17:07 AM
   of 738

Considerations to grow the 3D printing & additive manufacturing market

Share RecommendKeepReplyMark as Last Read

From: FUBHO5/19/2017 11:39:27 PM
   of 738
3-D printed ovaries produce healthy offspring

Bioprosthetic ovaries produced mouse pups in otherwise infertile mice

May 16, 2017 | By Kristin Samuelson

CHICAGO - The new world of 3-D printed organs now includes implanted ovary structures that, true to their design, actually ovulate, according to a study by Northwestern University Feinberg School of Medicine and McCormick School of Engineering.

By removing a female mouse’s ovary and replacing it with a bioprosthetic ovary, the mouse was able to not only ovulate but also give birth to healthy pups. The moms were even able to nurse their young.

The bioprosthetic ovaries are constructed of 3-D printed scaffolds that house immature eggs, and have been successful in boosting hormone production and restoring fertility in mice, which was the ultimate goal of the research. ...

Share RecommendKeepReplyMark as Last Read

From: FUBHO5/21/2017 11:00:34 AM
1 Recommendation   of 738
Rutherford is the first oxygen/kerosene engine to use 3D printing for all primary components.



Share RecommendKeepReplyMark as Last ReadRead Replies (1)

To: FUBHO who wrote (700)5/22/2017 10:48:12 AM
From: Savant
1 Recommendation   of 738

Hi winds delayed 1st launch of 3D printed rocket engine missile.

Rocket Lab has delayed for a day the start of a launch-attempt window to send its Electron rocket into space from its base in Mahia on the East Coast.

It says high winds on the peninsula have forced it to have another go tomorrow.

The company has said weather and other technical factors will dictate whether the test launch can be attempted and what one local described as a nasty southerly blew through at the weekend and will hang around early today.

The wind is forecast to be blowing from the southwest and more an 20km/h from the southwest this morning.

Share RecommendKeepReplyMark as Last ReadRead Replies (1)

From: EUthenics5/24/2017 4:48:26 PM
   of 738

Share RecommendKeepReplyMark as Last Read

To: Savant who wrote (701)5/25/2017 1:30:14 PM
From: Savant
2 Recommendations   of 738

3D rocket has successful lift off

Rocket Lab has created a piece of New Zealand space history with the first successful test launch of an electron rocket off the Mahia Peninsula at about 4.24pm today.

The previous three attempts have been "scrubbed" - with yesterday's launch called off just 12 minutes before the scheduled launch.

A crowd of spectators had waited eagerly at a beach near Nuhaka all afternoon for the rocket to blast off- and with poor weather conditions, and failing light, hopes were fading.

Cheers erupted as a bright light flashed up above Mahia Peninsula, rising slowly into the sky with a cloud of smoke below it.

The small group assembled at the site said they felt privileged to have witnessed the first Rocket launch from New Zealand.

Wellington's Doug Brennan had been at the site ever day, waiting for the rocket- which his son Sean helped build - to lift off.

He said he was happy to have finally seen it, and very proud of his son for helping to achieve it.

Rocket Lab tweeted just after blast off, saying it had been a success.

Share RecommendKeepReplyMark as Last ReadRead Replies (1)

To: Savant who wrote (703)5/25/2017 2:09:58 PM
1 Recommendation   of 738
You would think they would put a first like this on VIDEO...

Found it

Share RecommendKeepReplyMark as Last Read

From: FUBHO7/4/2017 9:10:28 PM
2 Recommendations   of 738

A peek inside Norsk Titanium's high-tech, 3-D printing shop

Jul 04, 2017 — by Zach Hirsch (Plattsburgh Correspondent) , in Plattsburgh, NY

One of Norsk's Rapid Plasma Deposition machines. Photo: Zach Hirsch

Listen to this story

Jul 04, 2017 — Norsk Titanium has become a huge source of pride for people in Plattsburgh.

It's a Norwegian aerospace company that makes airplane parts using high-tech, industrial, 3-D printing machines. The plant opened last year, and recently Norsk delivered its first federally approved parts for Boeing commercial airplanes.

The 3-D printing technology is at the cutting edge in the aerospace industry. Business leaders have called this the next industrial revolution. We visited the company's research and testing facility to see how it works.

The 3-D printers looked like long, supersized computer towers. A mechanical arm with little torches on the end shot a hot beam – fiery plasma – at a piece of titanium, melting it into shape and creating an intensely bright light.

“Don’t look at the beam, it’s going to hurt your eyes a lot,” said senior project manager Chaster Johnson.

<a href="" title="Norsk Titanium's patented Rapid Plasma Deposition technique in action. Photo: [url=]Norsk Titanium via YouTube[/url]." target="_blank" class="readableLinkWithLargeImage">
<img src="" alt="Norsk Titanium's patented Rapid Plasma Deposition technique in action. Photo: Norsk Titanium via YouTube." id="exifviewer-img-2" />
Norsk Titanium's patented Rapid Plasma Deposition technique in action. Photo: Norsk Titanium via YouTube.

Through a protective lens, the torches looked like something straight out of Star Wars – two green lightsabers.

That comparison made Johnson laugh. “There’s a lot of dynamics going on between those two lightsabers to get the quality you need into the part,” he said.

The torches were in a sealed chamber, behind a window. Titanium wire was carefully fed into the chamber from a spool. The whole machine was operated by just one or two people.

Johnson moved here from Georgia, where he worked for a company that used a more standard process called forging. “It’s a different beast than this. Forging - you hear slamming, it’s very noisy,” Johnson said.

Senior project manager Chaster Johnson. Photo: Zach Hirsch

They’d heat up a big block of metal in a furnace for hours, then carve away until they got the right shape, creating lots of waste. This rapid plasma technique doesn’t create that kind of waste. It’s relatively fast, cheap, and clean, according to Norsk. “It’s a very environmentally friendly process,” Johnson said. “There’s no smoke, there’s no toxins or anything coming out of the titanium as it’s being melted.”Only argon comes out – an inert, nontoxic gas that’s already abundant in the air.

About 30 people work here. Norsk expects to create up to 400 jobs as it expands. Out in the lobby and company museum area, CEO Warren Boley, Jr. said this is just the beginning.

“This is a development and qualification center. Having customers come, see the technology, approve it. And it will evolve into production here, and then 500 yards down the road at the old Clinton terminal, a larger facility will be built with more production machines,” he said, referring to the former Clinton County airport building.

Warren Boley, Jr. (center) speaking with former Congressman Bill Owens and Garry Douglas of the North Country Chamber of Commerce in 2016. Photo: Pat Bradley, WAMC

Boley didn’t say who the customers are. But Norsk has announced partnerships with Spirit Aerospace, Airbus, Alcoa, and Boeing. Just a couple of weeks ago, the company delivered its first parts of a Boeing Dreamliner 787 – the first FAA approved, 3-D printed aerospace components to be used in a commercial airplane, according to Norsk.By the end of the year there will be 20 of the rapid plasma machines here, Boley said, and at least 32 machines by the end of next year. As production picks up, so will the hiring.

“We do get a tremendous amount of resumes on a daily and weekly basis, and we’re going to hire the best talent,” Boley said.

He added that the next phase will start in the coming weeks, when they break ground on the main factory.


Share RecommendKeepReplyMark as Last Read
Previous 10 Next 10 

Copyright © 1995-2018 Knight Sac Media. All rights reserved.Stock quotes are delayed at least 15 minutes - See Terms of Use.