We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon
Investor in the best interests of our community. For example, here is how to disable FireFox ad content blocking while on Silicon Investor.
They said it was a 12 layer board, and the bump pitch for the interconnects is 130um (0.003" about, for pitch!) So what the line width and space width is would be very fine for pcbs. And what would via hole diameter be, and how are they made. How are the layers aligned and stacked, are they done like laminated pcb, or is the entire structure built up layer by layer by deposition and etch more like an IC?
A few years ago, 10 or 15, a few, I was experimenting with a waste oil burner and purchased a 0.010 carbide drill with a 1/8 shank to fit a die grinder collet. I was amazed that the company listed their smallest bit at 0.001. Even the 0.010 could only do a series of pecks gradually ...
I used a lathe with the die grinder mounted in the tool post and work piece chucked with the spindle locked. It would take quite some time to do one hole through 12 pcb layers otoh there could be quite a gang of bits in sync. Layers could be drilled individually. Copper wire with ball endo... My $0.02
>And what would via hole diameter be, and how are they made
And what would via hole diameter be, and how are they made. How are the layers aligned and stacked, are they done like laminated pcb, or is the entire structure built up layer by layer by deposition and etch more like an IC?
All good questions. None of which I have real answers for. Now I suspect that the vias are probably small enough that they have to be laser drilled. And for small volumes, that can be horrifyingly expensive. That isn't a NRE, though. And I suspect that if it is done more routinely, there is no reason why it can't be cheaper.
Regardless, it would be interesting to know what the costs are. And what effect volume has. If this is something that can be justified in a production run that numbers in the thousands, it can be a real game changer.
One wonders why they couldn't let customers do this too, and sell them the component level die, including other vendors doing the same, and then OEM customers can develop their own final package mix of die, for a System on Substrate device.
Which is sort of where I am going with this. By making all of their product line as chiplets, and having few I/O ones, AMD can offer a set of packaging services for customers that have enough volume. Outside vendors of other IP like networking, can produce chiplets with Infinity Fabric interconnects or maybe just PCIe X.Y that can be packaged along with AMD chiplets. Eventually others can do the same. Right now there are only two companies that can do this. Hopefully there could be more.
It would be nice to be able to go to a website and being able to select the chiplets and socket type you want. The company then would place and route it for you. A few weeks later you get some boxes with your design. I see no real reason it couldn't be done automatically.
With HBM, the circuit board would be reduced to low speed peripherals, connectors and power management.