|To: retrodynamic who wrote (338)||3/23/2018 1:28:25 AM|
|*Gearturbine, Draws and Key Information:|
*GEARTURBINE CENTER OF THE ROTOR PARTS
*GEARTURBINE LATERAL CUT PARTS
*GEARTURBINE ROTOR PARTS
*GEARTURBINE MORE ROTOR PARTS
*GEARTURBINE: ROTOR AND SHELL
* MUY INTERESANTE SCIENTIFIC MAGAZINE 1
* MUY INTERESANTE SCIENTIFIC MAGAZINE 2
* MUY INTERESANTE SCIENTIFIC MAGAZINE
*GEARTURBINE INSIDE ROTOR VIEW CONDUITS AND TURBOS, 5 CYCLE STEPS
*GEARTURBINE ·:8-X/Y Thermodynamic CYCLE - Way Steps
|RecommendKeepReplyMark as Last Read|
|From: FJB||4/29/2018 5:41:18 PM|
| Richard Branson unveils new |
Dubai hyperloop venture to
move freight at 760mph
| Daily Mail [UK], by Tim Stickings Original Article |
| Sir Richard Branson is teaming up with Dubai port operator DP world to enter the hyperloop business and move cargo at a top speed of 760mph. The cargo system, which is being designed alongside a possible passenger service by Virgin Hyperloop One, will be called the DP World Cargospeed. Sultan Ahmed bin Sulayem, the port operator´s CEO and chairman revealed the at a glitzy announcement alongside billionaire Mr Branson today on the floating hotel Queen Elizabeth 2 in Dubai. A hyperloop involves levitating pods, powered by electricity and magnetism, hurtling through low-friction pipes at a top speed of 1,220 kph|
|RecommendKeepReplyMark as Last Read|
|From: FJB||5/4/2018 12:03:34 PM|
|Yale physicists find signs of a time crystal|
By Jim Shelton
May 2, 2018
Yale physicists looked for a signature of a discrete time crystal in a crystal of monoammonium phosphate.Yale physicists have uncovered hints of a time crystal — a form of matter that “ticks” when exposed to an electromagnetic pulse — in the last place they expected: a crystal you might find in a child’s toy.
The discovery means there are now new puzzles to solve, in terms of how time crystals form in the first place.
Ordinary crystals such as salt or quartz are examples of three-dimensional, ordered spatial crystals. Their atoms are arranged in a repeating system, something scientists have known for a century.
Time crystals, first identified in 2016, are different. Their atoms spin periodically, first in one direction and then in another, as a pulsating force is used to flip them. That’s the “ticking.” In addition, the ticking in a time crystal is locked at a particular frequency, even when the pulse flips are imperfect.
Scientists say that understanding time crystals may lead to improvements in atomic clocks, gyroscopes, and magnetometers, as well as aid in building potential quantum technologies. The U.S. Department of Defense recently announced a program to fund more research into time crystal systems.
Yale’s new findings are described in a pair of studies, one in Physical Review Letters and the other in Physical Review B. The studies represent the second known experiment observing a telltale signature for a discrete time crystal (DTC) in a solid. Previous experiments led to a flurry of media attention in the past year.
“We decided to try searching for the DTC signature ourselves,” said Yale physics professor Sean Barrett, principal investigator for the two new studies. “My student Jared Rovny had grown monoammonium phosphate (MAP) crystals for a completely different experiment, so we happened to have one in our lab.”
Yale researchers Jared Rovny, left, Robert Blum, center, and Sean Barrett, right, made the discovery.MAP crystals are considered so easy to grow that they are sometimes included in crystal growing kits aimed at youngsters. It would be unusual to find a time crystal signature inside a MAP crystal, Barrett explained, because time crystals were thought to form in crystals with more internal “disorder.”
The researchers used nuclear magnetic resonance (NMR) to look for a DTC signature — and quickly found it. “Our crystal measurements looked quite striking right off the bat,” Barrett said. “Our work suggests that the signature of a DTC could be found, in principle, by looking in a children’s crystal growing kit.”
Another unexpected thing happened, as well. “We realized that just finding the DTC signature didn’t necessarily prove that the system had a quantum memory of how it came to be,” said Yale graduate student Robert Blum, a co-author on the studies. “This spurred us to try a time crystal ‘echo,’ which revealed the hidden coherence, or quantum order, within the system,” added Rovny, also a Yale graduate student and lead author of the studies.
Barrett noted that his team’s results, combined with previous experiments, “present a puzzle” for theorists trying to understand how time crystals form.
“It’s too early to tell what the resolution will be for the current theory of discrete time crystals, but people will be working on this question for at least the next few years,” Barrett said.
The National Science Foundation supported the research.
|RecommendKeepReplyMark as Last Read|
|From: Glenn Petersen||5/15/2018 10:06:03 PM|
|Subcutaneous Fitbits? These cows are modeling the tracking technology of the future|
Livestock Labs is getting bio-monitors under cows’ skin in hopes of helping farmers spot disease earlier, and it wants to bring its tech to people, too.
by Rachel Metz
MIT Technology Review
May 15, 2018
A tracker-equipped cow on the Utah State University dairy farm.
Somewhere o a dairy farm in Wellsville, Utah, are three cyborg cows, indistinguishable from the rest of the herd.
Just like the other cows, they eat, drink, and chew their cud. Occasionally, they walk over to a big, spinning red-and-black brush, suspended at bovine back height, for a scratch. But while the rest of the cows just get their scratch and move on, these cows deliver data. Trackers implanted in their bodies use low-energy Bluetooth to ping a nearby base station and transfer information about the cows’ chewing frequency, temperature, and general rambling around the farm.
These cows are the first to try a device called EmbediVet, created by a startup named Livestock Labs. For now, they’re just going about their normal lives, unintentionally providing data that helps train an artificial neural network. The hope is that in the near future, this AI will help farmers figure out quickly and easily how well cows and other livestock are eating, whether they’re getting sick or about to give birth—things that are typically done today just by watching and waiting but are difficult to spot when you’ve got hundreds or thousands of animals to keep an eye on.
Embedded RFID sensors and other trackers have long been used in livestock, though generally just for identifying each animal. There are already some behavior-tracking wearables out there, such as collars, that use sensors to pinpoint events like cud-chewing and illness. But Livestock Labs claims that once EmbediVet is implanted—currently in a surgical procedure done under local anesthetic—it’s less annoying to the cow than a wearable and, potentially, a more powerful way to collect useful data and spot bovine behavior patterns over time.
This subcutaneous tracker actually had a human tryout before it even got anywhere near a cow. And its creator hopes to eventually bring the cow-tested technology back under your skin.
Livestock Labs' EmbediVet tracker. The rounded part is a bit larger than a quarter.
Tried in humans, retooled for cattle
Livestock Labs CEO Tim Cannon never set out to make what is, in essence, an embedded Fitbit for cows. What he really wanted was to use the same technology to reengineer himself, and anyone else who wanted to do likewise.
Cannon, a software developer and biohacker, took his first plunge into surgically upgrading himself in 2010 after seeing a video of a Scottish biohacker named Lepht Anonym talking about the sensations produced by a magnet she implanted in her finger. Shortly thereafter, he got his own finger magnet and cofounded Grindhouse Wetware, a biohacking startup in Pittsburgh that focuses on designing and building implantable electronics.
For years at Grindhouse, Cannon and his team made several sensors, including a device called Circadia, which included a thermometer and LED lights that glowed from beneath the skin.
Cannon hoped Circadia could collect data and work with AI software he built to start predicting illnesses. And in 2013, after about a year of work and $2,000 in development costs, he had a Circadia sensor surgically implanted into his arm.
“When we did this, we were actually trying to throw down a glove to the medical industry, to technological fields, to say, ‘Look, if a bunch of idiots in a basement can do this while smoking joints and listening to Wu Tang, what the fuck is the problem?’” Cannon says.
The problem, it seems, is that beyond a small community of hackers, grinders, and curious observers, most people just aren’t interested in having things implanted in their bodies, especially if these things aren’t medically necessary.
Grindhouse tried selling the implants it created, but it wasn’t making money. It couldn’t pull in any investors, so Cannon and others were funding the work themselves with their day jobs. They grew aware of the enormous regulation challenges they faced if they wanted to make non-essential implants for humans, he says, and realized that the job would undoubtedly include years of work and millions of dollars.
Then, last spring, an Australian biohacker named Meow-Ludo Disco Gama Meow-Meow (yes, really) contacted Cannon with an idea. A tech incubator in Sydney, Cicada Innovations, was about to launch a program that focused on helping build agricultural food technology companies (the country has a large livestock industry, with about 25.5 million cattle). How about putting sensors in cows instead of people?
It was like a “Duh, it’s obvious” moment, Cannon says. His new venture, dubbed Livestock Labs, was accepted to Cicada’s GrowLab program. In September, Cannon moved to Sydney from his home in Pittsburgh, and soon started working with a small team to remake the Circadia sensor from scratch into one that could be implanted in farm animals.
Within months, Livestock Labs readied a new device—now called EmbediVet—for testing in cattle. Covered in a clear resin, it includes an ARM processor and Bluetooth and long-range radios, as well as a thermometer, accelerometer, and heart-rate monitor and pulse oximeter for measuring heart rate, blood oxygen levels, temperature, and basic activity. It runs on a coin-cell battery the company expects will last for about three years.
On the farm
On April 3, Kerry Rood, an associate professor at Utah State University’s School of Veterinary Medicine, implanted a series of EmbediVet sensors in three cows on the school’s dairy farm: two in the left side of the lower jaw, and one between two ribs. (Since there’s not much existing data about the best places for implanted activity trackers in cattle, and Livestock Labs wants to log chewing and rumination, these seemed like good starting points.)
To perform this minor surgery, Rood gave the cows local anesthesia, sliced their hide in the proper spots, slipped in an EmbediVet prototype, and stitched them up. Over a month later, he says, they’re tolerating the implants well.
A cow on Utah State University's dairy farm that has been embedded with Livestock Labs' EmbediVet tracker.
Why do it? Rood thinks that this kind of device can be more accurate than a wearable one such as a collar or an anklet, especially when it comes to tracking a metric like body temperature, which correlates with disease, in thick-skinned animals.
To check out the early data, Cannon says, he’s built some charting software that can pull in what’s gathered from the cows’ EmbediVet devices and plot it out. Eventually, Livestock Labs intends for farmers to use a smartphone app to check out their animals’ status and see alerts about issues.
“As a veterinarian, if there’s some way I can detect animal diseases, animal discomfort, earlier, then I’m ahead of the ballgame when it comes to providing care and welfare to these animals,” Rood says.
With just homemade needles and some cells from an ear biopsy, Jose Cibelli of Cyagra demonstrates how to build a blue-ribbon steer.
Beyond the work Livestock Labs is doing with Rood, Cannon says, other research trials are in the works with Charles Sturt University and the University of New England, both in Australia, as well as trials with some commercial farmers he won’t name. He hopes EmbediVet will be available in a public beta test next March.
“We stumbled onto something that was a lot bigger and more in demand than we thought, in this particular sector of the world,” Cannon says.
Ryan Reuter, an associate professor of animal science at Oklahoma State University who studies beef cattle, thinks the tracker could be quite useful. He cautions, however, that there are a lot of factors to consider with its design. For instance, cows are big and strong and like to rub on things (such as that aforementioned back scratcher), so anything implanted in them needs to be rugged enough to hold up to abuse. It also needs to stay in place, he says, especially with animals being raised to be eaten.
“That would be important in food animals, so you make sure that you put the implant somewhere that it has no chance of ending up in a food product for humans,” he says.
There’s also the issue of pricing, since margins in dairy and beef cattle production are slim. The components of EmbediVet cost $20 right now, Cannon says, but it’s not clear what the eventual price will be; Reuter says that somewhere in the range of $10 or $20 a cow would get beef or dairy farmers interested.
Back to you, humans?
These days, Cannon splits his time between Pittsburgh and Sydney. Livestock Labs has $2 million in early funding from Australia’s livestock industry group, Meat & Livestock Australia (which is also a GrowLab partner), and additional funds from individual investors in the US.
For now, he’s concentrating on making sure that the implants aren’t causing any unintended consequences with the cyborg bovines.
“They are developing a slight urge to destroy humanity,” he jokes, “but we’re monitoring it.”
Joking aside, Cannon is serious about one goal that’s far beyond anything his startup may do to help farmers and their livestock. He says he also hopes the company gets people more comfortable with the idea of bodily implants in general. He is adamant that one day he will return to offering sensors to people—though he’s not sure if it will be a totally new company or a “human line” from Livestock Labs.
The second option, he admits, might be “just a little bit too much for people.”
|RecommendKeepReplyMark as Last Read|
|From: Glenn Petersen||5/27/2018 9:56:30 PM|
|Coming to you live from your belly: A tiny internal bleeding sensor|
May 24, 2018
Ingestible sensor developed at MIT that can detect biomarkers of internal bleeding in the stomach. Credit: Lillie Paquette, MIT.
Doctors are now one step closer to deploying sensors that can travel to parts of a patient's body to diagnose hard-to-detect conditions.
The details: In a new study published Thursday in MIT's Science journal, researchers report on a tiny sensor they developed that can be swallowed, which contains genetically modified bacteria capable of detecting heme, a component of blood, in the stomach. The bacterial response can be converted into a wireless signal, which is then read by nearby computers or a specially-designed app on an Android phone.
Hunting down internal bleeding: The researchers created sensors aimed at detecting internal bleeding in the stomach, which can be caused by a variety of disorders, such as ulcers, and is often hard to identify. They also designed sensors that can locate a marker of inflammation.
What they found: In the experiments, the genetically engineered E. Coli bacteria produced light when they came in contact with blood or inflammation components in the gut of pigs. The researchers combined this capability, which synthetic biologists have previously demonstrated, with a low energy electronic chip that converted the light into a signal that could be transmitted to a nearby phone or computer. This combination of bacterial sensing with low power circuits and transmitting capabilities is what makes the findings so novel.
“Our vision is we want to try to illuminate and provide access to areas that are not easily accessible.”— Timothy Lu, MIT associate professor of electrical engineering. Methodology: The researchers took a genetically modified, probiotic strain of E. Coli and placed it inside their sensor, along with a membrane that allowed small molecules from the surrounding environment to pass through. They also installed transistors to measure the light produced by the E. Coli cells when they came into contact with heme, which is the substance inside red blood cells that binds to oxygen in the lungs. The transistors then would send that information to a tiny chip, and relay a signal to a nearby phone or computer.
-- GThe sensor is not quite small enough yet to be put into wide use, nor does it have Food and Drug Administration approval for human applications. It's about 1.5 inches long, and needs about 13 microwatts of power, which for now comes from a 2.7-volt battery. The researchers said they could "probably" reduce the sensor's volume by about one-third, thereby making it far more suitable for human use.Tests in pigs were successful: The tests in pigs showed promising results, with the sensor picking up whether any blood was in the animals' stomach. It's possible that the device, or others like it, could be used to monitor the stomach consistently for days or weeks, constantly sending signals that would be monitored by patients and their doctors.
Why it matters: This would have significant advantages over current diagnostic tools, such as endoscopy, which requires patients to be sedated and only gives a one-time snapshot of the stomach's contents.
-- Study co-author Mark Mimee said the techniques used for this study could be used to detect the presence of other biomarkers in addition to heme. What they're saying: “We could evolve these systems to apply to virtually any other biomarker,” he said during a press conference call on Tuesday. “This is platform technology that could be used by many synthetic biology groups.”
Lu said building biomarkers to detect various health conditions is becoming "a whole field" unto itself, and that for some diseases, such as colon cancer, you may soon be able to swallow an early warning pill. “What if you could actually swallow a pill every week or every month that gives you early detection?” he said.
The bottom line: This ingestible biosensor is an example of the future of diagnostic tools.
|RecommendKeepReplyMark as Last Read|
|From: FJB||7/6/2018 9:56:07 AM|
Japan Tests Silicon for Exascale Computing in 2021
Fujitsu and RIKEN have dropped the SPARC processor in favor of an Arm design chip scaled up for supercomputer performance
By John Boyd
Photo: FujitsuHow Supercomputing Can Survive Beyond Moore's Law
Japan’s computer giant Fujitsu and RIKEN, the country’s largest research institute, have begun field-testing a prototype CPU for a next-generation supercomputer they believe will take the country back to the leading position in global rankings of supercomputer might.
The next-generation machine, dubbed the Post-K supercomputer, follows the two collaborators’ development of the 8 petaflops K supercomputer that commenced operations for RIKEN in 2012, and which has since been upgraded to 11 petaflops in application processing speed.
Now the aim is to “create the world’s highest performing supercomputer,” with “up to one hundred times the application execution performance of the K computer,” Fujitsu declared in a press release on 21 June. The plan is to install the souped-up machine at the government-affiliated RIKEN around 2021.
If the partners achieve those execution speeds, that would place the Post-K machine in exascale territory (one exaflops being a billion billion floating point operations a second).
To do this, they have replaced the SPARC64 VIIIfx CPU powering the K computer with the Arm8A-SVE (Scalable Vector Extension) 512-bit architecture that’s been enhanced for supercomputer use, and which both Fujitsu and RIKEN had a hand in developing.
The new design runs on CPUs with 48 cores plus 2 assistant cores for the computational nodes, and with 48 cores plus 4 assistant cores for the I/O and computational nodes. The system structure uses 1 CPU per node, and 384 nodes make up one rack.
For strategic reasons, neither Fujitsu nor RIKEN will reveal how many nodes they are targeting with the Post-K. However, Satoshi Matsuoka, director of the RIKEN Center for Computational Sciences in Kobe, says, “It will be the largest Arm system in the world and in fact, likely the largest supercomputer in the world.”
For system interconnection, Fujitsu is employing its Tofu 6D Mesh/Torustopology originally created for the K computer.
Besides the adoption of a new CPU, several other key technologies are behind the Post-K’s ramp up in execution speed, says Matsuoka. Memory bandwidth has been increased by “more than an order of magnitude,” and network bandwidth has also significantly increased.
In addition, Fujitsu has enhanced the double-precision arithmetic performance of that found on the K computer. And to increase application versatility, it has also added support for half-precision floating point arithmetic that reduces memory loads in applications like AI, where lower precision is acceptable, explains Koji Uchikawa in Fujitsu’s Business Strategy and Development Division.
As well as adopting the Arm instruction set architecture, Fujitsu worked with Arm Limited, the Cambridgeshire, U.K.-based company that develops and licenses Arm technology, to implement new instructions for the scalable vector extension.
Moreover, Fujitsu has developed its own microarchitecture for the chip. Whereas a processor’s instruction set architecture interfaces between the hardware and software to provide instructions to the processor, it does not define the chip’s internal structure. Rather, that is the job of the microarchitecture, and because it directly impacts the processor’s performance, Fujitsu believes this will be an important differentiating factor in its favor.
RIKEN and Fujitsu see several other advantages in adopting the new architecture, not least the design’s inherent power-saving features such as power knobs that dial down the power in certain elements of the CPU when they are not needed. Consequently, Fujitsu is claiming a power consumption of just 30 to 40 megawatts compared to the K computer’s 12.7 MW—despite the Post-K’s target of delivering up to a hundred-fold increase in application processing speed.
Both Fujitsu and RIKEN say they also intend to leverage Arm’s large software ecosystem. “We, Fujitsu, and other collaborators will drive the Arm ecosystem in the high-end server space,” says RIKEN’s Matsuoka. This, he adds, will help contribute to any commercial success Fujitsu has “in selling not only their systems but also the chip to external companies.”
At the same time, Fujitsu “will provide a compatible performance balance with the K computer so that current applications can be migrated after recompiling,” says Uchikawa.
But the supercomputer race is nothing if not a game of hopscotch.
For the first time in six years, the U.S. has just regained the top slot in global rankings of supercomputer performance with the newly installed Summit supercomputer in Oak Ridge National Laboratory in Tennessee. According to June’s TOP500 assessment, Summit achieved a performance of 122.3 petaflops, bumping China’s Sunway to second place with a performance of 93 petaflops. Lawrence Livermore National Laboratory’sSierra came in third with 71.6 petaflops.
So when the Post-K comes online around 2021, it will find no shortage of competitors vying for the leading position. Nevertheless, RIKEN’s Matsuoka brushes aside such comparisons. “Catalog flops is not our concern. For most applications, Post-K will likely exhibit the fastest time-to-solution and utmost scalability due to its brilliant memory and network bandwidths, as well as an outstanding power-efficient design.”
No doubt it won’t be long before competitors beg to differ.
|RecommendKeepReplyMark as Last Read|
|From: FJB||7/7/2018 6:16:07 AM|
|VLSI Symposia: Samsung eyes EUV for mainstream chip-making at 7nm|
At VLSI 2018, Samsung unveiled its forthcoming 7nm FinFET platform technology, writes Gary Dagastine.
It is said to be the first mainstream semiconductor manufacturing technology to use extreme ultraviolet (EUV) lithography for single-patterning of middle- and back-end-of-the line features – EUV is expected to offer better pattern uniformity and cost advantages versus standard multiple-patterning approaches for extreme scaling.
EUVThe company used EUV, along with additional front-end scaling, special design constructs and a single diffusion break, to build transistors with a fin pitch and contacted polysilicon pitch (CPP) of 27nm and 54nm, respectively, demonstrating a 50-60% reduction in power requirements versus the company’s 10nm technology.
Samsung EUV lithography demonstrated better fidelity to the mask pattern than traditional argon fluoride (ArF) lithography
Samsung built a 256Mbit SRAM array with a cell size of just 0.0262µm2from these devices, along with CPU/GPU logic circuits, all of which met NBTI reliability requirements.
Separately, the company detailed a low-power 8nm FinFET logic technology for mobile, high-performance and low-power applications. An extension of its existing 10LPP (“Low Power Plus”) 10nm process in volume production, the new 8LPP process consumes 7% less power, is some 15% smaller in area, and can operate at 0.35V. These improvements are due to continued scaling of gate lengths and fin profiles, along with reduced contact resistance and a better sub-threshold leakage profile.
As if two new advanced manufacturing processes weren’t enough, Samsung took the wraps off yet another, which it claims offers the most competitive device performance and aggressive gate pitch (78nm) in the foundry business at technology nodes larger than 10nm. The low-power, high-performance 11LPP platform technology is for mobile and GPU applications. It adopts and enhances features from the company’s existing 14nm and 10nm technologies and incorporates updated design rules. In a ring oscillator test circuit, device performance was shown to be 25% better than Samsung’s 1st generation 14nm finFET technology. (Or if performance was held the same, then power consumption was 42% less.)
Meanwhile, Globalfoundries unveiled a 12nm FinFET technology for low-power, high-performance applications. An evolution of its 14nm 14LPP technology, the new 12LPP process reduces area and power requirements by 10% and 16%, respectively, or it can deliver a 15% performance improvement at a given leakage, all with comparable reliability and yield. In addition, SRAMs built with the new process benefit from a 30% leakage reduction.
Separately, Globalfoundries posed and answered the question, how can the use of copper interconnect be extended as scaling proceeds? The problem is that resistance in copper lines increases as line-widths shrink because of electron scattering at grain boundaries, surfaces and interfaces. Company researchers described a nanosecond flash anneal process that increases copper grain sizes, thereby removing many of these boundaries and interfaces, and providing a better interface between the copper and barrier layers, thus a less resistive path for electrons.
Copper interconnect before (a) and after (b) Globalfoundries’ nanosecond laser anneal.
Left in each image is copper grain orientation
Middle is copper grain phase
Right is transmission electron microscope photo
All show that copper lines have larger grains and fewer troublesome grain boundaries and better interfaces after the anneal.
The result is a 35% reduction in resistance, giving a 15% improvement in RC delays and a gain in on-current (IDsat) of 2–5%. In addition, breakdown voltage and copper reliability were enhanced. However, the company said the process, while useful for the most critical metal levels, may not be economical for all levels.
A step toward practical quantum electronicsCEA-Leti led the conference into an entirely different realm: the world of quantum electronics. Manipulating the “spin” of electrons and holes in silicon holds promise as the basis for quantum computing, which one day may be used to solve problems beyond the reach of today’s supercomputers. However, in order to make quantum computing practical and to be able to scale it up in manufacturing, a way must be found to control electron/hole spin electrically, and not with complex hybrid co-integrated micromagnet/electrical schemes.
As a step toward doing this, CEA-Leti disclosed it has experimentally demonstrated the first electric field-mediated control of the spin of electrons in silicon, using a SOI quantum dot device fabricated in a standard CMOS process flow. The underlying control mechanism is based on a complex interplay between spin-orbit coupling and the conduction band of silicon, enhanced by the device’s geometry.
MRAMs, and More MRAMsAs the industry moves to smaller nodes, the scaling of SRAM memory for embedded last-level-cache (LLC) applications becomes challenging and the search is on for alternatives. Spin-transfer-torque magnetic random access memory (STT-MRAM) has shown great promise given its speed, endurance and suitability for back-end integration, but its relatively high operating voltage is a concern.
However, TDK-Headway researchers detailed at VLSI 2018 the first STT-MRAM capable of low-voltage, low-power operation. By cleverly engineering the tunnel barrier in 30nm devices, they achieved writing voltages as low as 0.17V (for a 1ppm error rate), 20ns writing operation and 35µA writing current. They say further improvements are possible.
Samsung described an embedded STT-MRAM built in a 28 FD-SOI process. It operates across the full industrial temperature range (-40ºC to 125ºC) and exhibits high endurance and more than 10 years of data retention. Memory cell operation is said to be robust in solder reflow conditions and under external magnetic disturbance.
Globalfoundries, with an eye toward automotive applications, unveiled a fully functional embedded MRAM (eMRAM) integrated into a 22-nm FD-SOI CMOS process flow. It demonstrated a bit error rate of less than <1 ppm after five solder reflows, met the automotive grade-1 data retention requirement, and demonstrated high intrinsic stand-by magnetic immunity. The researchers say these results indicate eMRAM is capable of serving a broad spectrum of eflash applications at 22 nm or beyond.
TSMC unveiled a 16Mb embedded MRAM reference and sensing circuit in a 40nm CMOS logic process that addresses a key problem with MRAM devices: a small read window, arising from MRAM’s small tunnel-magneto-resistance ratio. TSMC addressed this problem with a hybrid-resistance-reference and novel cell configuration. The measured results show better than 1µA sense resolution and a speedy 17.5ns access time from -40ºC to 125°C.
Autonomous mini-dronesFinally, autonomous, miniature drones are on their way. A Massachusetts Institute of Technology team described a chip they call Navion, which enables autonomous navigation of miniaturized robots such as nano drones.
Said to be the first fully integrated visual-inertial odometry (VIO) chip, Navion is an asic fabricated in 65nm CMOS and co-designed in tandem with the algorithms which run on it. It uses inertial measurements and mono-stereo images to estimate a drone’s trajectory, as well as to generate a 3D map of its environment. On-chip integration of these functions reduces energy and footprint, and eliminates costly off-chip processing and storage. It can process 752×480 stereo images at up to 171fps and inertial measurements at up to 52kHz, and is configurable to maximize accuracy, throughput, and energy-efficiency across various environmental conditions.
Gary Dagastine attended the recent Symposia on VLSI Technology and Circuits in Honolulu.
This year more than 900 scientists, engineers and technologists attended the annual event, which alternates between Hawaii and Kyoto, Japan. It was the highest attendance in 12 years, a noteworthy inflection given the increased cost and difficulty of continued scaling according to Moore’s Law.
And, following the path of Moore’s Law is just one approach. “We have broadened our views on how to move forward,” said Maud Vinet, VLSI committee member and manager of the Advanced CMOS Laboratories at Grenoble-based CEA-Leti. “There are lots of tricks available in terms of materials and new architectures that will help us continue to serve up innovations.”
|RecommendKeepReplyMark as Last Read|