SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

   Strategies & Market TrendsBeat The Street With SI Traders


Previous 10 Next 10 
From: Rocket Red10/22/2021 10:31:25 AM
   of 233585
 
HIGH ESNR SGD loadup if you like HIGH GRADE GOLD

Share RecommendKeepReplyMark as Last Read


From: Rocket Red10/22/2021 10:35:23 AM
   of 233585
 
phun should of bought that yesterday to at 1.50

Share RecommendKeepReplyMark as Last Read


To: Rocket Red who wrote (214627)10/22/2021 11:12:44 AM
From: longz
1 Recommendation   of 233585
 
NICE!

Share RecommendKeepReplyMark as Last ReadRead Replies (1)


To: longz who wrote (214633)10/22/2021 11:17:48 AM
From: Rocket Red
1 Recommendation   of 233585
 
was a early xmas present from Trump

Share RecommendKeepReplyMark as Last Read


From: Rocket Red10/22/2021 11:18:55 AM
   of 233585
 
SGD 161 metres full of visual gold through out drill hole YUKON LOADUP

Share RecommendKeepReplyMark as Last Read


From: Rocket Red10/22/2021 11:24:01 AM
1 Recommendation   of 233585
 
Who Loaded the Gun WOWSA

Filmmaker Halyna Hutchins dies after prop gun was ‘discharged by Alec Baldwin’ on a film set, police say

A woman is dead and a man injured following an incident on the New Mexico film set for the movie Rust on Thursday, local time, The New York Times and BBC News report. Santa Fe County Sheriff’s Office confirmed actor Alec Baldwin, who is producing and starring in the film, discharged a prop firearm that killed the director of photography, Halyna Hutchins. The injured man, confirmed to be the film’s writer and director Joel Souza, left hospital after receiving treatment.

Share RecommendKeepReplyMark as Last ReadRead Replies (2)


To: Rocket Red who wrote (214636)10/22/2021 11:44:40 AM
From: longz
   of 233585
 
ya seen that yesterday....yikes!

Share RecommendKeepReplyMark as Last ReadRead Replies (1)


From: Rocket Red10/22/2021 11:56:20 AM
   of 233585
 
Environmentalists ask judge to shut down Maine hydroelectric dams - The Center Square


these people need to be have there mouths sewed uppppppppppppppppppppp

Share RecommendKeepReplyMark as Last ReadRead Replies (2)


From: Rocket Red10/22/2021 11:58:17 AM
   of 233585
 
China coal prices dive as govt plans intervention to ease power crunch

Share RecommendKeepReplyMark as Last ReadRead Replies (1)


To: Rocket Red who wrote (214638)10/22/2021 11:58:47 AM
From: johnlw
   of 233585
 
Moving target from Tofino boy.

Canada oil producers grapple with Trudeau's demand for faster emissions cuts

WINNIPEG, Manitoba, Oct 22 (Reuters) - Canada's oil producers face new pressure from Prime Minister Justin Trudeau to reduce emissions in just three years, a sudden acceleration of their plans that at least one major company said looks unrealistic.

Suncor Energy (SU.TO), the second-largest Canadian crude producer, says it remains focused on cutting emissions by 2030, not 2025 as the Canadian government will require.

"Honestly, 2025 is going to be tough," Martha Hall Findlay, Suncor's Chief Sustainability Officer, told Reuters. "That's not a number we've used, it's a number the feds have used."

Trudeau's advanced timetable for cuts to the oil sector's total emissions by 2025, announced last month, comes as the oil sector has focused on longer-term targets, and on reducing emissions on a per-barrel basis.

"That is light speed for an oil sands company. That’s tomorrow," said Kevin Birn, chief analyst of Canadian oil markets at consultancy IHS Markit, of Trudeau's demand. "They’re a very hard ship to turn because they have so much emissions."

Previously, Ottawa had a target of cutting national emissions by at least 40% by 2030, but it did not single out the oil sector. Canada's crude industry generates some of the highest emissions per barrel worldwide.

Suncor is the only big producer that has laid out a plan - in May - to cut total emissions by 2030, depending heavily on carbon capture, greener power sources and energy efficiency.

But Trudeau's 2025 demand came as a surprise.

"We had obviously been having conversations with the feds long before the budget came out last spring, long before the (election) campaign," Hall Findlay said. "None of those discussions have mentioned 2025. At Suncor, we're laser-focused on 2030."

Canadian Natural Resources Ltd (CNQ.TO) and Cenovus Energy (CVE.TO), have been planning for months to unveil their emissions targets by year-end.

Cenovus intends to cut emissions on an absolute and per-barrel basis, said spokesman Reg Curren, but he would not say if cuts would occur by 2025.

Canadian Natural is working on "mid-term" targets connected to the Pathways carbon capture project with its peers, said spokesperson Julie Woo. She would not say if they would address Trudeau's 2025 requirement.

Governments and business would need to spend C$60 billion annually to cut Canada's emissions by 75% in the next 30 years, RBC Economics said.

Canadian producers are expected to report big quarterly profits in coming weeks as oil and gas prices have soared. The companies have prioritized repaying debt and returning cash to investors, but Trudeau wants producers to spend some profits on curbing emissions.

He plans to unveil his new cabinet on Tuesday, just ahead of the United Nations' Climate Change Conference in Glasgow, Scotland.

Ottawa wants to ensure there are ambitious emission reductions from the oil and gas sector, making a meaningful contribution to Canada's climate goals, said Joanna Sivasankaran, spokesperson for the Canadian environment department.

Trudeau's 2025 goal is "ambitious for sure" and it would be more realistic to expect the sector to cut emissions sharply by a decade later, said Steve MacDonald, CEO of Emissions Reduction Alberta, an arms-length corporation funded by the provincial government.

'EASIER THAN ANYONE THINKS'

Some small conventional oil producers are already showing deep emissions cuts are possible, however, using methods that big producers Canadian Natural and Cenovus could widely apply. Both companies produce crude in the oil sands and by conventional methods.

Yangarra Resources (YGR.TO), which produces 10,000 barrels of oil equivalent per day, says it will cut total emissions by 47%, or 50,000 tonnes of carbon dioxide equivalent, by the end of 2022. Its plans involve powering 80 pumpjacks with electricity from the Alberta grid, instead of burning natural gas, and replacing older instruments that emit high amounts of methane.

"Cutting carbon in the oil patch is going to be a whole lot easier than anyone thinks," said Yangarra CEO Jim Evaskevich. "All of the changes we are implementing make incredible economic sense."

The moves are likely to generate substantial credits next year that Yangarra can sell to bigger emitters, although the monetary value has not yet been determined, Evaskevich said.

Cenovus, which generates 18% of its production from conventional operations, has cut its methane emissions by nearly half from 2015 levels, a spokesperson said. Canadian Natural has cut methane emissions by 28% since 2016, Woo said.

"They're big, large operations, and they can't pivot quite as quickly," MacDonald said. "But that doesn't mean they aren't moving forward in the same areas."

Emissions reductions are difficult for oil sands operations because of the energy they require, while conventional methane emissions are easier to tackle, said Keith Stewart, senior energy strategist at Greenpeace Canada.

Oil sands producers are counting on expanded carbon capture and sequestration facilities to cut emissions. But the economics require government funding, said Greg McNab, a partner at the Baker McKenzie law firm. Using renewable power to run oil sands facilities may be the quickest way to curb emissions, he said.

Share RecommendKeepReplyMark as Last ReadRead Replies (1)
Previous 10 Next 10