To: Ptaskmaster who started this subject | 11/27/2002 11:46:26 AM | From: Natasha_Kidd | | | News Releases - Wednesday, November 27, 2002 PTM Subsidiary -- Active Gold Group Ltd. Closes $500,000 Private Seed Funding
================================================= On November 26,2002 Active Gold Group Ltd., ("Active Gold") closed a private, non-brokered seed financing for $500,000 Canadian at $0.35 per Active Gold share with seven outside investors resulting in a total of 5,457,141 shares outstanding. Platinum Group Metals Ltd. (TSX: PTM) will hold 1,461,904 shares of Active Gold or 26% as previously announced.
platinumgroupmetals.net |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
To: Ptaskmaster who started this subject | 11/29/2002 12:25:15 AM | From: Natasha_Kidd | | | News Releases - Thursday, November 28, 2002 Platinum Group Metals Ltd. Enters Into Agreement for Brokered Private Placement for up to $2,500,000 =================================================
Platinum Group Metals Ltd (TSX-V: PTM) has entered into a best efforts agency agreement, subject to regulatory approval, with Pacific International Securities Inc. ("PI") and Haywood Securities Inc. as co-lead agents for an offering of up to 1,600,000 Flow Through Units at $0.65 per Flow Through Unit and up to 3,000,000 Non-Flow Through Units, at $0.50 per Unit….
platinumgroupmetals.net |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
To: Ptaskmaster who started this subject | 12/2/2002 5:23:20 PM | From: Natasha_Kidd | | | News Releases - Monday, December 02, 2002 Two Drills Being Mobilized to Test Newly Discovered Mafic Intrusion Adjacent to Platinum Anomalies and Stinger PGE Zone ========================================================
Platinum Group Metals Ltd. (TSX-V: PTM) is pleased to announce that prospecting on the Company's Thread and Pebble properties, located 35km east-northeast of the Lac des Iles Mine, has resulted in the discovery of a previously unrecognized large, layered mafic intrusion.....
platinumgroupmetals.net |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
To: Ptaskmaster who started this subject | 12/18/2002 10:14:43 PM | From: Natasha_Kidd | | | Wed Dec 18, 2002 Update
-------------------------------------------------------------------- Platinum Group Metals Ltd. (PTM: TSX-V) provides the following update.
The Company now holds four option property interests in South Africa including the Elandsfontein, Ledig, War Springs and Tweespalk properties. As previously announced, these properties are held under option agreements with the underlying owners. Africa Wide Investments, a black empowerment company with considerable expertise in the legal and environmental fields, is a 30% joint venture partner on the War Springs and Tweespalk Projects. The Company plans to drill on all four of its South African properties in the first quarter 2003, provided the Permits are in place. platinumgroupmetals.net |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
To: Ptaskmaster who started this subject | 2/5/2004 2:46:10 PM | From: timester | | | PPG.T will be an interesting one to watch. A deal is almost struck on the Theiry mine which is a shut down copper mine but had some showings of platinum and palladium. Do not know any details but an announcement could be soon. |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
From: aknahow | 8/22/2012 8:08:59 PM | | | | Yes given the uncertain supply situation platinum may do well in the short to medium term. But Nanostellar, a private company, really is able to commercialize Noxicat then it is all over for platinum.
"
"In addition to significantly reducing the costs of emissions control systems, Noxicat™ has numerous performance benefits over the incumbent platinum based catalysts" commented Pankaj Dhingra, Nanostellar's President and CEO. "Noxicat™ enables higher fuel efficiency by allowing engine designers to reduce the frequency of filter regeneration events and allows for redesign of the emissions control system for further optimization."
Dr. Bulent Yavuz, Nanostellar's vice president of sales and marketing who has been monitoring the reaction of early customers stated that "Noxicat™ has created an unprecedented level of excitement among heavy-duty diesel engine manufacturers for both its performance benefits and its promise of significant cost reductions. The commercialization efforts received a further boost when customer testing revealed that Noxicat™ is able to regenerate itself after exposure to fuel-borne sulfur."
PR Newswire (http://s.tt/1l925)
Noxicat uses no precious metals. Previously Nanostellar developed and commercialized NS Gold which replaced part of the platinum used in light diesel vehicles. Don't expect that to compete against Noxicat either. Check out worldwide interest on Nanostellar's Twitter.
It took 10 years for platinum to see production use 70% of production used for catalytic converters. At the moment Noxicat appears to threaten only diesel vehicle use of platinum. It could be worth understanding what makes impossible to use in non diesel vehicles. |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
From: canucklehead80 | 9/14/2012 2:28:49 PM | | | | Opening Up The Ring Of Fire Wes Hanson Discusses Noront’s Nickel-Copper-PGM Feasibility Study Kevin Michael Grace
Noront Resources Ltd V.NOT announced September 5 the results of a 43-101 feasibility study of its Eagle’s Nest nickel-copper-PGM mine at McFaulds Lake in the Ring of Fire, northern Ontario. Based on metals prices of $9.43 per pound copper, $3.60 per pound copper, $1,600 per ounce platinum, $599 per ounce palladium and $1,415 per ounce gold, the study forecasts an aftertax net present value (NPV) of $543 million (at an 8% discount rate), a 28% aftertax internal rate of return (IRR), a $609-million initial CAPEX, plus a $160-million life-of-mine sustaining CAPEX and a three-year payback period.
Eagle’s Nest contains proven and probable resources of 11.1 million tonnes grading 1.68% nickel, 0.87% copper, 0.89 grams per tonne platinum and 3.09 g/t palladium. The mine is forecast to produce one million tonnes per year, producing 150,000 tonnes of nickel-copper concentrate annually over 11 years, at $97 per tonne or $2.34 per pound of nickel equivalent.
Read more of this interview with Wes Hanson on Noront's Nickel-Copper-PGM play. |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
From: aknahow | 9/21/2012 7:25:12 PM | | | | In the long run we are all dead.
Platinum is dead.
The price provides too great an incentive fo develop technologies that reduce or eliminate the need for platinum in catalytic converters. Nanostellar's NS Gold would have reduced usage. While its' Noxicat eliminates platinum use in one application.
Granted Nanostellar's efforts may fail but the incentive is out there and challenges will come from various directions.
Nanotechnology will provide challenges using various materials. But my point is an industrial metal cannot expect demand to continue unchanged regardless of price. Big deal we all know this, except that we don't.
This does not mean that supply disruptions will not cause temporary price spikes. |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last ReadRead Replies (4) |
|
To: aknahow who wrote (523) | 9/22/2012 7:30:54 PM | From: aknahow | | | Nanotechnology in Fuel Cells July 28th, 2012 nanoguru Fuel cells are the next generation power source of electric vehicles. Typically, fuel cell is a device which converts a fuel directly into electricity in an electrochemical reaction. The fuel cells are electrochemical devices that combines hydrogen and oxygen to produce electricity, with water and heat as its by-product. A fuel cell consists of two electrodes, an anode and a cathode, with an electrolyte between them. The research in the field of fuel cells have thrown light in to the new ways to revolutionize transportation using fuel cells. The electric motors in this fuel cell vehicles will be powered by highly efficient fuel cells.
As the fuel cells are the next generation power sources, the research in this field is also getting much attention. The problem with the existing fuel cells are it contain membranes that allow hydrogen ions to pass through the cell but do not allow other atoms or ions. So, for this purpose membranes with better characteristics to be needed. Now researchers are using nanotechnology to create more efficient membranes; the new membrane will allow them to build longer lasting and lighter weight fuel cells.
The common catalysts used in fuels are hydrogen or methanol, to produce hydrogen ions. Platinum, a most expensive material is used as a catalyst in this process. As the platinum is an expensive material, a more economical material is needed to reduce the cost of fuel cells. The Research will lead to the replacement of nanoparticles of platinum as a catalyst to reduce the amount of platinum needed. The experiment is underway to use nanoparticles of other materials to replace platinum entirely and thereby lowering the cost of production. The catalytic electrodes in fuel cells has been replaced with platinum nanoparticles instead of a solid platinum surface. This will increases the efficiency, and allows much less platinum metal to be used.
For the case of transportation applications, the proton exchange membrane (PEM) fuel cells (also known as polymer electrolyte membrane fuel cells) are using. These fuel cells are powered by the electrochemical oxidation reaction of hydrogen and by the electro reduction of the oxygen contained in air.
Nanotechnology offers cheap bipolar materials using Nano composites, more efficient and less cost, non-platinum electro catalysts. The more thermally stable and more durable membranes to become available in the near future.
Another important invention this field is the use of carbon nanotubes. Modified carbon nanotubes can be used to replace platinum in fuel cells. By doping carbon nanotubes with nitrogen, or coating them in an electron-withdrawing polymer (polydiallyldimethylammonium chloride, or PDDA), the electronic properties of the nanotubes can be altered so as to make them effective as a catalyst and the electro catalytic activity of these modified nanotubes is found to be superior to that of platinum.
Now the problems with the fuels using in the fuel cell. At this time, commercial fuel cells can only run on a limited range of fuels. Most of the fuel cells using hydrogen, and some fuel cells are able to use methanol or natural gas. Further researcher in this field brings the fuel cells, highly efficient, portable and powerful power source. You can find different companies working in the field of fuel cells from understanding nano and comparison of fuel cells type is available in Wikipedia.
What you think about the future of fuel cells? Can it satisfy our need for highly efficient, portable power source for electric vehicles? |
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
To: aknahow who wrote (523) | 9/22/2012 7:52:46 PM | From: aknahow | | |  With nanotechnology rapidly advancing, the sci-fi dream of a Star Trek replicator becomes increasingly less fantastic. But such radical technology would, in theory, require the kind of subatomic manipulation that far exceeds current capabilities. Scientists lack both the equipment and the fundamental knowledge of quantum mechanics (the Standard Model, for all its elegance, remains incomplete) to build items from the raw stuff of quarks, gluons, and electrons . . . but what about alchemy?

Even Isaac Newton, credited with the dawn of the Age of Reason, felt the mystical draw of alchemy, working in secret to transform one element into another. Centuries later we still can’t conjure gold from lead, sure, but what if it was possible to combine a handful of elements to very closely mimic gold? What if scientists engineered a synthetic Midas Touch that tricked base metals into performing like gold, thereby conquering the hurdles of rarity and price?
Now forget the alchemist’s dream of gold and consider the equally precious noble metal platinum – hovering right around $50,000 per kilogram – which may be the key to building a sustainable energy future. Now, using advanced technology and elements that cost 1000 times less, researchers at Brookhaven National Lab have created a high-performing pauper’s platinum from nanoscale building blocks.
Beyond the silver sheen of the metal, platinum sets the gold standard (forgive the pun) for catalytic performance, improving a reaction’s efficiency while remaining largely unchanged. The electrolysis of water, or splitting H2O into oxygen (O2) and hydrogen (H2), requires external electricity and an efficient catalyst to break chemical bonds while shifting around protons and electrons. Once isolated, hydrogen gas offers one of the most promising renewable alternatives to dependence on a limited fossil fuel supply.
For a catalyst to facilitate an efficient reaction, it must combine high durability, high catalytic activity, and high surface area. Platinum knocks this out of the park, but its price discourages heavy investment from industry. The challenge, then, is to find what one Brookhaven chemist called a “Goldilocks” compound – the performance of platinum and the abundance of affordable non-noble metals.
This magnified image from a transmission electron microscope reveals the nanosheet structure of the breakthrough electrocatalyst, seen here as dark, straight lines.
The Brookhaven team first combined nickel ($20 per kilogram) and molybdenum ($32 per kilogram), and then used high-temperature ammonia to infuse the compound with bolstering nitrogen. Then something unexpected happened.
The scientists expected discrete, sphere-like particles, but the resulting low-cost compound, NiMoN, took the surprising form of two-dimensional (atom-thin) nanosheets. The catalytic activity then exceeded expectations, in part because of that huge boost in surface area – just consider the difference between a bed sheet balled up and one laid out flat. Their results were published online this week in Angewandte Chemie International Edition.
This electrocatalyst does not address all of the barriers to developing a hydrogen-based energy economy. The electricity required to perform water-splitting remains high and, right now, impractically expensive. But overcoming the high price and limited supply of platinum makes hydrogen more attractive than ever as a renewable fuel source. It also marks a major victory for the almost alchemical transformations possible in nanoscience.
Learn more about this new nanosheet compound in the official press release: Nanosheet Catalyst Discovered to Sustainably Split Hydrogen from Water
This post was written by Brookhaven Lab science writer Justin Eure.
|
| Platinum Group Metals (PGMs) | Stock Discussion ForumsShare | RecommendKeepReplyMark as Last Read |
|
| |