We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Electron Energy Storage

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
From: Eric5/1/2024 4:56:21 PM
   of 805
Sakuu’s dry-printed Cypress Li-metal batteries achieve 1,000 cycles

01 May 2024

Sakuu, a provider of commercial-scale equipment and technologies to the battery manufacturing industry, has manufactured its high-energy, high-power Li-Metal Cypress battery cell using a fully dry manufacturing process.

Sakuu has overcome the industry known challenges of Li-Metal anode chemistries in both wet and dry electrode manufacturing, as shown by its commercial-grade battery cells delivering:
  • 1,000 cycles at 100% DoD to 80% SOH @ 0.3C/1C

  • 800+ Wh/l Energy Density of active cell area

  • 3C Sustained Discharge, 10C Peak, with full recovery

  • 8C Pulse Discharge

Sakuu is reshaping the landscape of battery manufacturing through comprehensive process and product disruption. A recent analyst report from S&P Global indicated that Sakuu’s targeted energy density is expected to set a new standard in the industry for battery-cell energy density. Cypress has also recently achieved UN38.3 certification.
The biggest challenge in battery manufacturing today is producing next generation batteries cost-effectively at scale to meet demand. Manufacturing Cypress in a fully dry process with the Kavian platform is a key step in enabling high-quality solid-state batteries to be produced in high volume in the future. Leveraging dry printing will enable battery technology innovation to accelerate the adoption of EVs while eliminating range anxiety.

—Robert Bagheri, CEO and Founder of Sakuu
Printing batteries on the Kavian platform with dry-process electrode technologies:
  • Eliminates all toxic solvents and materials, including NMP and PTFEs

  • Eliminates all toxic solvents and materials, including NMP and PTFEs

  • Cuts factory floor space requirements up to 33%

  • Reduces utility costs up to 40%

  • Improves factory carbon footprints up to 40%
    Posted on 01 May 2024 in Batteries, Manufacturing, Market Background, Solid-state |
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext