SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Mining News of Note

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
Recommended by:
Valuepro
To: LoneClone who wrote (162757)1/13/2022 2:46:29 PM
From: LoneClone1 Recommendation  Read Replies (1) of 168835
 
EXCELLON DRILLS 2,490 G/T SILVER EQUIVALENT OVER 2.9 METRES AT PLATOSA


newswire.ca

Excellon Resources Inc. Jan 13, 2022, 07:00 ET

TORONTO, Jan. 13, 2022 /CNW/ - January 13, 2022 – Excellon Resources Inc. (TSX: EXN) (NYSE: EXN) (FRA: E4X2) ("Excellon" or the "Company") is pleased to announce results from underground drilling at the Platosa Mine in Durango, Mexico.

Highlights







PLATOSA MINE - UG Infill and Expansion Drilling (CNW Group/Excellon Resources Inc.)






  • Follow-up drilling on the 817 Zone below Manto 623 defined a zone of high-grade silver mineralization, with underground diamond drilling results including:
    • 2,490 g/t silver equivalent ("AgEq") over 2.9 metres (1,430 g/t Ag, 12.0% Pb, 21.7% Zn) and 5,089 g/t AgEq over 0.4 metres (4,035 g/t Ag, 25.2% Pb, 11.8% Zn) in EX21UG761;
    • 3,905 g/t AgEq over 1.8 metres (2,398 g/t Ag, 14.2% Pb and 33.2% Zn) in EX21UG760;
    • 2,124 g/t AgEq over 2.8 metres (1,267 g/t Ag, 7.5% Pb and 19.0% Zn) in EX21UG812;
    • 4,939 g/t AgEq over 0.9 metres (4,060 g/t Ag, 29.7% Pb, 3.3% Zn) in EX21UG769;
    • 3,158 g/t AgEq over 1.0 metres (2,956 g/t Ag, 6.1% Pb and 1.3% Zn) in EX21UG770;
  • Underground drilling continues to test below historically-mined areas for potential vertical zones.
"Drilling at Platosa following up on the 817 Zone has defined vertically-oriented, high-grade mineralization over approximately 30 metres of strike and 30 metres of vertical extent," stated Jorge Ortega, Vice President Exploration. "The proximity of existing infrastructure should allow access to this zone in the coming months and supplement first and second quarter production. We continue underground drilling to target areas ahead of production, test the extent of mineralization around mine workings and test for vertical zones of mineralization."

Exploration Results

The following table shows highlighted intervals from the current definition and infill program being conducted from underground at Platosa:



Hole ID(1)

Interval(2)

Interval(3)

Ag

Pb

Zn

Au

AgEq(4)

Area

From

To

metres

g/t

%

%

g/t

g/t

EX21UG758

11.0

11.5

0.5

2,176

22.8

10.9

-

3,138

817

and

20.8

21.5

0.7

392

1.9

5.4

-

625

817

EX21UG759

16.9

17.3

0.4

1,799

16.0

4.1

-

2,353

817

EX21UG760

15.4

17.2

1.8

2,398

14.2

33.2

-

3,905

817

EX21UG761

14.1

14.5

0.4

4,035

25.2

11.8

-

5,089

817

and

17.6

20.5

2.9

1,430

12.0

21.7

0.1

2,490

817

EX21UG762

11.0

12.0

1.0

722

5.1

38.8

0.1

2,188

817

EX21UG763

11.4

11.8

0.4

428

5.2

9.3

0.1

884

817

EX21UG764

11.5

12.4

0.9

515

4.3

19.4

0.1

1,295

817

EX21UG765

18.4

18.7

0.3

1,791

17.9

25.4

-

3,124

817

EX21UG766

18.2

18.8

0.6

2,044

14.7

5.9

-

2,627

817

EX21UG767

14.8

15.5

0.7

3,043

26.1

2.3

-

3,794

817

EX21UG768

15.9

16.3

0.4

618

0.9

0.1

-

644

817

EX21UG769

17.3

18.2

0.9

4,060

29.7

3.3

-

4,939

817

EX21UG770

13.5

14.5

1.0

2,956

6.1

1.3

-

3,158

817

EX21UG777

18.0

20.2

2.2

910

4.4

0.4

-

1,038

817

EX21UG812

66.3

69.1

2.8

1,267

7.5

19.0

0.2

2,124

817

PH16-11

25.7

25.9

0.2

4,847

26.1

9.0

-

5,830

817






(1)

Highlighted intervals include holes intersecting >0.2m and over 500 g/t AgEq from a total of 30 drill holes (1,388 metres).

(2)

From-to intervals are measured from the drill collar. All holes were drilled from underground stations.

(3)

All intervals are reported as core length; true width is estimated to range from 50-90% of core length.

(4)

AgEq in drill results assumes $24.00 Ag, $0.90 Pb, $1.20 Zn and $1,800 Au with 100% metallurgical recovery.




Follow up drilling on the high-grade interval intersected in EX21UG690 (2,860 g/t AgEq over 7.5 metres) has defined a high-grade, vertical zone on approximately 30 metres of vertical extent. The 817 Zone provides additional dry tonnes to the current mine plan, with production expected to commence from the area as early as February 2022.

Drilling from underground continues ahead of production at the NE-1 Manto, and will continue to target areas ahead of production, test the extent of mineralization around mine workings and test for vertical zones of mineralization at the 623, NE-1, Guadalupe Sur, Guadalupe Norte, 4, and 6A/B mantos.

As referenced on January 5, 2022, Excellon continues to assess whether maintaining a consistent production schedule at the Platosa Mine is feasible beyond mid-2022 at achievable dewatering rates and with acceptable capital expenditures.

Technical Information and Quality Control Notes

The drilling results contained in this news release have been prepared in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101").

Platosa drill core samples are prepared and assayed by SGS Minerals Services in Durango, Mexico. The lab is accredited to ISO/IEC 17025. Assay turnarounds have been impacted recently by supply and labour shortages related to COVID-19. The Company has a comprehensive QA/QC program, supervised by an independent Qualified Person.

The sampling of, and assay data from, the core sampling and reporting is monitored through a quality assurance and quality control (QAQC) program designed according to best industry practice. Samples from HQ sized drill core are selected by Excellon geologists and cut into halves at the project site. Half of the core is retained at the site for reference purposes. Sample intervals vary from 0.2 to 1.5 metres in length with samples being selected to honour geological contacts. Samples are labeled and packed into sealed plastic bags which are grouped into larger fiber bags for shipping. A formal chain-of-custody procedure is in place for security of samples from project to laboratory.

Samples are shipped to SGS Laboratories in Durango City. Samples then undergo crushing to two millimetres followed by pulverizing to homogenize samples before a 50-gram sub sample is selected for analysis. The samples are then analyzed using fire assay for gold and silver with a gravimetric finish and multi-element analysis performed by ICP analysis for base metals and multi-element data.

Qualified Person

Mr. Jorge Ortega, P. Geo., Vice President Exploration, has acted as the Qualified Person, as defined in NI 43-101, with respect to the disclosure of the scientific and technical information contained in this press release.

About Excellon

Excellon's vision is to create wealth by realizing strategic opportunities through discipline and innovation for the benefit of our employees, communities and shareholders. The Company is advancing a precious metals growth pipeline that includes: Platosa, a high-grade silver mine producing in Mexico since 2005; Kilgore, an advanced gold exploration project in Idaho with strong economics and significant growth and discovery potential; and an option on Silver City, a high-grade epithermal silver district in Saxony, Germany with 750 years of mining history and no modern exploration. The Company also aims to continue capitalizing on current market conditions by acquiring undervalued projects.

Additional details on Excellon's properties are available at www.excellonresources.com.



Forward-Looking Statements


The Toronto Stock Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of the content of this Press Release, which has been prepared by management. This press release contains forward-looking statements within the meaning of Section 27A of the Securities Act and Section 27E of the Exchange Act. Such statements include, without limitation, statements regarding mineral resources estimates, the future results of operations, performance and achievements of the Company, including potential strategic transactions, the timing, content, cost and results of proposed work programs, the discovery and delineation of mineral deposits/resources/reserves, geological interpretations, proposed production rates, potential mineral recovery processes and rates, business and financing plans, business trends and future operating revenues. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate and similar expressions, or are those, which, by their nature, refer to future events. The Company cautions investors that any forward-looking statements by the Company are not guarantees of future results or performance, and that actual results may differ materially from those in forward looking statements as a result of various factors, including, but not limited to, variations in the nature, quality and quantity of any mineral deposits that may be located, significant downward variations in the market price of any minerals produced, the Company's inability to obtain any necessary permits, consents or authorizations required for its activities, to produce minerals from its properties successfully or profitably, to continue its projected growth, to raise the necessary capital or to be fully able to implement its business strategies. All of the Company's public disclosure filings may be accessed via www.sedar.com and readers are urged to review these materials. This press release is not, and is not to be construed in any way as, an offer to buy or sell securities in the United States.


Cautionary Note to U.S. Investors: The terms "mineral resource," "measured mineral resource," "indicated mineral resource" and "inferred mineral resource," as used on Excellon's website and in its press releases are Canadian mining terms that are defined in accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101"). These Canadian terms are not defined terms under United States Securities and Exchange Commission ("SEC") Industry Guide 7 and are normally not permitted to be used in reports and registration statements filed with the SEC by U.S. registered companies. The SEC permits U.S. companies, in their filings with the SEC, to disclose only those mineral deposits that a company can economically and legally extract or produce. Accordingly, note that information describing the Company's "mineral resources" is not directly comparable to information made public by U.S. companies subject to reporting requirements under U.S. securities laws. U.S. investors are urged to consider closely the disclosure in the Company's Form 40-F which may be secured from the Company, or online at https://c212.net/c/link/?t=0&l=en&o=3411812-1&h=633606556&u=http%3A%2F%2Fwww.sec.gov%2Fedgar.shtml&a=http%3A%2F%2Fwww.sec.gov%2Fedgar.shtml.




SOURCE Excellon Resources Inc.

For further information: Please Contact: Excellon Resources Inc., Brendan Cahill, President & Chief Executive Officer, Jorge Ortega, Vice President Exploration, (416) 364-1130, info@excellonresources.com, www.excellonresources.com


Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext