SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : 3D Printing
DDD 34.48+9.9%Jan 22 4:00 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
From: The Ox5/18/2020 11:44:26 AM
1 Recommendation

Recommended By
Savant

  Read Replies (1) of 786
 
phys.org
Bursting your (tiny) bubbles: new research points the way toward pore-free 3-D printing

by Andre Salles, Argonne National Laboratory


What this research team found surprised even them. In a paper published in Nature Communications, the group described the three forces acting upon pores within the melt pool: buoyancy, which should force the gas up and out of the melt area; melt flow drag, which should swirl the gas around within the molten pool; and thermocapillary force, which drives the pores to move along the temperature gradient.

Of these three forces, they discovered that the thermocapillary force in certain area of the molten pool exerts the most influence over where the pores ended up. The drag created by the melting liquid metal is second, which means that the natural tendency of these gas pockets to move upward and out of the melt area was countered.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext