SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Aquariums - Fresh & Salt
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: SiouxPal who wrote (94)3/18/2005 6:39:30 PM
From: goldworldnet  Read Replies (1) of 102
 
After considerable thought I think I’ve figured out how to lift this tank and stand onto dollies and roll it into another room. Something totally unrelated though was the solution for some wiring I did a few years back. The den has a vaulted ceiling and I wanted to run a wire down it. The problem was a double 2x4 header at the 8’ level I couldn’t get past. My final solution was to put a skill saw at a 45 degree angle and cut first one way and then the other, which cut out a triangle piece of the header inside the wall. Then I only had to caulk over the slits that were in the sheetrock. Hopefully you could follow that, but I thought it was a neat idea.

* * *
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News